Miscellaneous - Proxxon, Trend (222)

The laser rangefinder enables the contactless measurement of distances up to 40 m. In addition, it has a conventional, extendable measuring tape for measuring shorter distances of up to 5 m. Measuring range up to 40 m (laser) or 5 m (mechanical measuring

Elastic silicone polishers in bullet shape. For polishing and smoothing surfaces. For precious metals, non-ferrous metals, stainless steel, glass, porcelain, wood, rubber and plastic. Set of 5

With fabric insert. 50 x 1 x 10 mm. For cutting steel, non-ferrous metal, plastic and wood. Diameter: 50 mm.

The problem solver for the workshop. The Micro-Speeder! The new ring-ratchet spanner Unbeatable in tight spaces! Dimensions: 17 mm x 19mm

High-quality steel brush for high removal rate. 2 pieces, brush shape

Ideal for grinding, deburring, scharpening, rust removal and roughing of steel and non-ferrous metal.

The problem solver for the workshop. The Micro-Speeder! The new ring-ratchet spanner Unbeatable in tight spaces! Dimensions: 16 mm x 18mm

It turns the PD 230/E and PD 250/E lathes into a complete machining center. Incl. column (35x 400mm), mounting flange and fixing screws. Scope of delivery: Drilling and milling device WITHOUT lathe.

Tool holder for cylindrical grinding on lathes Made of steel with 20 mm MICROMOT system fit. For precise clamping of IBS/E or LBS/E drill grinders in the steel holder of the lathe. Stem size 8 x 10 mm. Total length: 65 mm.

Mobile version of the proven STS/E super jigsaw (NO 28 530). Ideal for fine curved cuts in wood up to 12 mm, composites up to 5 mm and non-ferrous metal up to 3 mm. Infinitely variable stroke rate control from 2,000 - 4,500/min. The scope of delivery incl

Made from HSS steel. DIN 333 (type A). 60°. Complete set of centre drills in sizes 2 mm, 2.5 mm and 3.15 mm.

For precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiselling and cutting. With drill chuck (clamping range 0.3 - 3.2 mm). Precision ball-bearing spindle made of ground steel that can be locked at the push of a button for

The UPO1002 series of digital phosphor oscilloscopes uses the innovative Ultra Phosphor 2.0 technology with an upgraded look and features such as deep memory, high waveform acquisition rate, real-time waveform recording and playback, and 256-point greysca

PROXXON super-fine grinding discs made of silicon carbide are ideal for the pre-grinding and finishing of fillers and paint and for removing paint drips and entrapped particles.

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

The UT622A handheld LCR meter offers powerful features, a high degree of accuracy, fast measurement speed and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, a large-capacity battery and a test frequency of up to 10 kHz, this meter

Diamond grinding pins ball 1mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter 2.35.

Brass brushes, 5 pieces, in a wheel shape and 1 shaft, suitable for machining brass, copper, semi-precious stones, plastic and wood, as well as for cleaning electronic components and circuit boards.

Flap wheels made of standard corundum The flap wheels are elastic and adapt to the contours of the workpiece to be processed. For machining hard to reach places. Flap wheel diameter 20mm (Shaft diameter 3.0mm)

The UT330TH/UT330THC USB data loggers use high-precision temperature and humidity sensors to monitor and record over a long period of time. They are ideal tools for monitoring temperature and humidity sensitive goods such as pharmaceuticals and perishable

MICROMOT 110/P Flexishaft Rotated aluminium tool holder with dual ball bearing-mounted steel shaft. Ball bearing-mounted shaft end. Highly flexible core (does not run hot when working with tight radii). For holding MICROMOT steel collets. Length 100 cm. 6

High-quality steel brush for high removal rate. 5 pieces, wheel shape and 1 shaft.

Automatic release when tightening screws: clearly hear and feel the click signal when the selected torque is reached. Set the torque by turning the knurled ring on the handle end (lockable). Easy-to-read window scale. 50-mm long, slim shaft with magnetic

Der Feinmechanikersatz mit 1/4''-MICRO-Bit-Ratsche von PROXXON ist perfekt zum Schrauben auf engstem Raum. Kein Bit-Adapter nötig! Bits in Industriequalität, formgenau und verschleißfest. Aus Chrom-Molybdän-Silicium-Mangan-Vanadium-legiertem Spezialstahl.

A precision tool for precision engineering and modelling. MICRO-Press MP 120 Pressing in, pressing out, riveting, imprinting, edging, bending wires and sheet metal. Beading and embossing of easy to form materials. With 5 cylindrical pressing tools (surfac

The 11-mm orbital motion of the polishing disc enables hologram-free polishing of painted and bare surfaces without heat building up. Powerful, balanced DC special motor with stepless speed control (full-wave electronics). Smooth-running planetary gear in

Electronically controlled temperature with short heating time. Extra-high battery capacity for long operating life. For convenient, mains-independent soldering. Electronically controlled temperature (470°C) with short heating time. Extra-high battery capa

The UT 8800 series are optically appealing and very robust table multimeters. These can be operated simply and intuitively and are therefore ideal for use in production, development, schools, universities and laboratories. The modern LED display, which is

Wolfram vanadium steel milling bits, for machining soft and hard wood, non-ferrous precious metals, as well as plastics and plaster.

Strong and versatile problem solver for the fine job in crafts and industry! Made in the EU. High-quality 10.8 V Li-ion battery with 2.6 Ah for a performance comparable to that of our mains-connected counterpart. With a battery charge, you can work for a

The UT622E handheld LCR meter offers powerful features, a high degree of accuracy, fast measurement speed and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, a large-capacity battery and a test frequency of up to 100 kHz, this devi

The UPO1000 series of the digital phosphorus oscilloscopes utilises UNI-T 3D Ultra Phosphor 2.0 technology and offers a new design upgrade as well as features such as deep storage, a high waveform capture rate, real-time waveform recording and playback an

''Super Cut'' circular saw blade Diameter: 58 mm 80 alternately set teeth. Ideal for hard wood, soft wood, Pertinax and plastic. For fast and clean cuts. Teeth are individually set and sharpened: Super cutting performance!

Compact and powerful battery device made in Europe. With transmission head made of die-cast aluminum for high stability! High-quality 10.8 V Li-ion battery with 2.6 Ah for a performance comparable to that of our mains-connected counterpart. With a batter

For clamping asymmetrically shaped wood. Clamping range with reversing jaws from 1.5 - 35 mm inside and from 14 - 67 mm outside. Easy to secure with M16 x 1 internal thread suitable for the main spindle of the DB 250.

TrueRMS mini current clamp UT210D. The functions and features: Current measurement up to 200 A AC / DC Voltage measurement up to 600 V AC/DC Resistance measurement up to 20 MOhm Frequency measurement up to 60 kHz Capacitance measurement up to 20 mF T

Saw blades with cross pin. 127 mm. For non-ferrous metal, GRP, plastic, Plexiglas and wood. 1.76 x 0.25 mm

Special workshop set: With forged, short tubular socket wrenches and external ratchet. For work on tie rods and torsion bars (usually sizes 17 and 19), shock absorbing nuts (size 22) and for pulley assembly on alternators (size 24). With reversible ratche

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits desc

Micro Click MC 500 torque wrench. For 100 - 500 Nm. For carrying out repairs on small trucks, vans and tractors. With 3/4-inch square drive (20 mm). Ratchet mechanism, can be switched between clockwise and anti-clockwise rotation. Sturdy steel shaft with