Miscellaneous - Raidon, Romagna Plastic, V-Tac (67)

Flat LED, round special form, 3 mm, green. Manufacturer no.: L-424GDT

LED work light, 60 W, (20x3 W), approx. 5400 lumens, aluminium and glass polycarbonate housing Technical details: Lamp: 20 x high power LEDs at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 5400 lumens, light colour 6000k Dimensions (WxHxD): approx. 9

LED working floodlight, 120 W, (40x3 W), approx. 7800 lumens, Housing aluminium, glass polycarbonate, Technical details: illuminant: 40 x high power LED at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 7800 lumens Light colour: 6000 K Protection class

• C-2R filament • Miniature lamp / micro incandescent lamp for versatile use, e.g. switches, buttons, etc.

RAFI indicators • With integral bulb • 10 mm • Arrow-shaped bezel • 24 - 28 V

RAFI indicators • With integral neon bulb • 10 mm • Arrow-shaped bezel • 230 V

• Small lamp • C-2R indicator and signal lamp

LED tube from the V-TAC Professional Line - to meet the very highest demands. Rotating version They feature a plastic housing, making them less breakable than glass tubes. A starter is included with the tubes. This replaces the existing starter. Install t

Filament bulb, 24 V / 5 W Bulb • 24 V / 5 W • 42 mm For the following part numbers: WERMA 200 xxx xx WERMA 203 xxx xx WERMA 641 xxx xx WERMA 815 xxx xx

LED tube from the V-TAC Professional Line - to meet the very highest demands. Highly efficient at 160 lm/W They feature a plastic enclosure, making them less breakable than glass tubes. A starter is included with the tubes. This replaces the existing star

LED work light, 420 W, (140 x 3 W), approx. 42,000 lumens, aluminium and glass polycarbonate enclosure Technical details: Lamp: 140 x high power LEDs at 3 W Voltage: 10 - 30 VDC Light intensity: approx. 42,000 lumens, light colour 6000k Dimensions (WxHxD)

LED work light, 5 x 3 W, approx. 900 lumens, aluminium and glass polycarbonate housing, Technical details: Lamp: 5 x high power LED, power: 15 W (5 x 3 W) Voltage: 9 - 32 V, light intensity: approx. 900 lumens Protection class: IP67 Dimensions (W x H x D)

Sub-miniature bulb T1 Voltage: 18 V Current: 26 mA Output: 0.47 W Pin socket spacing: 2.54 mm Dimensions (ØxL): 3.17 x 9.5 mm Type: indicator lamp

WERMA red LED flashing light 24 V AC/DC Optical signal element • Clear signalling even in low light conditions • Service life: 50,000 h • Flash frequency approx. 1 Hz For the WERMA modular system, you need the following elements: • Signal element(s) • Con

Filament bulb, 230 V / 5 W Bulb • 230 V / 5 W • 42 mm For the following part numbers: WERMA 200 xxx xx WERMA 203 xxx xx WERMA 641 xxx xx WERMA 815 xxx xx

RAFI indicators • With integral bulb • 10 mm • Square bezel • 24 - 28 V

• Small lamp • C-2R indicator and signal lamp

RAFI indicators • With integral bulb • 10 mm • Arrow-shaped bezel • 24 - 28 V

5 mm LED indicator in a bright chrome fitting with an external reflector. Colour: red Installation diam.: 8 mm IP67, 12 volt, 4.5 mcd With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful sol

3 mm LED indicator in a bright chrome fitting with an external reflector. Colour: white Installation diam.: 6 mm IP40, 24 volt With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful soldering.

• High power DC COB (Chip-On-Board) LED, JU1215 series • High efficiency • Multi-Chip solution • RoHS compliant • Energy Star/ANSI compliant binning structure

3 mm LED indicator in a bright chrome fitting with an external reflector. Colour: blue Installation diam.: 6 mm IP40, 24 volt With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful soldering.

Super bright white 3mm LEDs on base with integrated series resistor and diode. Sockets with center contact have this as standard anode connection (+). Integrated series resistor with standard one-way rectification (protection diode). • Base: T5.5 • Color:

Red neon bulb With built-in resistor, 230 V

LED Ba15d R37 x 42 12 V 240 lm 5 W 927 35° AC/DC Silver Dim

Multi-Look® LED lamp for BA9s base Multi-Look® LED lamp with single chip. By sealing the chip LED, both an increase of the beam angle and a high mechanical protection are achieved. The lamps are therefore shock and vibration resistant. Special combination

E10 G15x29 mm, 6 V, 1000 mA, 6 W, C2R, 1000 hours, clear - 10 pcs