Miscellaneous - Romagna Plastic, V-Mark, Wera (88)

6 50 mm-long Wera bits tidily arranged in a minimum of space in a practical Bit-Check. The tough viscous bits are suitable for universal use. In the case of the Torsion bits (TZ), torque peaks are additionally absorbed in the Torsion zone. This prevent

Particularly small bitholding screwdriver with extremely short bit mounting for hard to reach areas. With ratchet function and fine toothing for a low return angle. Easy-to-operate reversible ring (right, fixed, left). Includes 6 tough, universal bits, wh

Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent m

29 bits and 1 Rapidaptor stainless steel bit holder: stainless tools minimise the formation of rust on stainless steel screws 3888/4/1 K 1 x 1/4''x50 3851/1 TS PH 1 x PH 1x25 3 x PH 2x25 1 x PH 3x25 3855/1 TS PZ 2 x PZ 1x25 3 x PZ 2x25 1 x PZ 3x25 3867/1

Dimmable constant current LED driver (SELV) Features: Independent LED driver with strain relief housing Extra-flat design for constrained installation conditions (small ceiling cut-outs and low ceiling voids) Dimmable via leading edge and trailing edge

High-quality LED transformer for reliable lighting The Self Electronics LED transformer provides a reliable power supply for your LED applications. Features Independent operating device Non-dimmable Protection class II, SELV output Constant voltage I

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 15,0m

7-piece toolkit. For professional screwdriving/professional fine adjustment AND torque-controlled screwdriving. Slip-over and therefore safe torque mechanism with quick adjustment for clockwise/anticlockwise and five selectable tightening torques (2.0, 3.

1x Rapidaptor universal holder with ring magnet and quick-release chuck, 29x bits, 867/1 TORX® HF with holding function for internal TORX® screws in accordance with the Acument Intellectual Properties specification, also suitable for Würth ASSY screws and

Compact LED switching power supplies from SELF electronics - the right power supply for every application. Independent operating device Protection class II, SELV output Constant current Flicker-free design IP 20 Protected against overload, short circ

This Nedis 20 W USB-C™ fast car charger with power delivery allows you to charge any USB and USB-C™ device from your car's power outlet. The included USB-C™ cable with Lightning connector makes fast charging your iPhone easy. You can charge an iPhone 8 or

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 1,0m

Compact LED switching power supplies from SELF electronics - the right power supply for every application. Independent operating device Protection class II, SELV output Constant current Flicker-free design IP 20 Protected against overload, short circ

Bit-Check 12 Wood TX HF 1, 12 pieces Particularly suitable for wood applications 867/1 TORX® HF bits with holding function for TORX® screws in accordance with the Acument Intellectual Properties specification Also suitable for Würth ASSY screws and Alte

Features Independent power supply Class II protection, SELV output Constan voltage IP20 Protected against over load, short circuit, over voltage and over temperature EN61347-1, EN61347-2-13, EN55015, EN61000-3-2 etc. For LED lighting applications

One Rapidaptor bit holder with quick-release chuck, 49 BiTorsion bits for long life, diamond-coated (BDC) for secure screw fit, tough (BTZ), for universal use, extra hard (BTH), 11 bits, tough (Z), for universal use. One of the biggest problems with mecha

Universal holder for the take-up of bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3. Quick-release chuck for rapid bit change. The strong permanent magnet holds the bits absolutely securely. ¼ hexagonal, suitable for power screwdrivers with ta

6 50 mm long Wera Torx bits clearly arranged in the smallest space in the practical bit check. The tough bits are suitable for universal use. Contents: 6x 867/4 Z TORX® bits: TX 10x50, TX 15x50, TX 20x50, TX 25x50, TX 30x50, TX 40x50.

Power for your LED solutions by V-TAC. With short circuit protection, overload protection, stable output voltage Switching metal power Supply for all types of strip lights, led lighting, led display, etc. Built-in EMI Filter 100% load tested

Bit set, ideal for woodworking. The 867/4 TORX® HF bits have a special geometry that ensures that TORX® screws are held securely on the tool in accordance with the specifications of Acument Intellectual Properties. This is particularly useful in difficult

Subminiature incandescent lamp with cable

One Impaktor holder with snap ring and magnet in the attachment for a secure grip on the bit in the holder, nine Impaktor bits. Impaktor technology ensures the best possible use of material properties and optimum geometries for an above-average service li

Self AC/DC-LED power supply unit CC 20 W IP20 Dali-2 Features: Protection class II, SELV output Dimmable Interface: Dali-2 Constant current Output current can be selected For LED applications Protected against overload, short circuit and extreme tem

Bit-Check 30 Wood TX HF 1, 30 pieces Particularly suitable for wood applications 867/1 TORX® HF bits with holding function for TORX® screws in accordance with the Acument Intellectual Properties specification Also suitable for Würth ASSY screws and Alte

Rapidaptor universal holder for bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve

Kraftform Kompakt Stubby Magazine 5, 6 pieces Use: Suitable for bits with 1/4-inch hexagon drive in line with DIN ISO 1173-C 6.3 and Wera Connection Series 1 Design: Bit holder with strong permanent magnet, bits, tough (Z), for universal use. Handle: Kraf

One universal holder with stainless steel case, retaining ring and strong permanent magnet, 11 bits, tough (Z), for universal use. Bits can be inserted easily, they then lock into place automatically. Easy bit removal without additional tools. Even small

Use: Suitable for bits with 1/4'' hexagon drive according to DIN ISO 1173-C 6.3 and E 6.3 and Wera Connection Series 1 and 4 Version: With compact stainless steel holder and strong permanent magnet. Reliable bit-holding function thanks to locking mechanis

One Rapidaptor universal holder with ring magnet and quick-release chuck, 29 bits, torsion-style design (T) to reduce premature wear, tough (Z), for universal use, extra-hard (H). Bit-Checks can be stood on the workbench so your tools are always close to

1/4'' Cyclops connecting part with quick change chuck for fast bit change Suitable for 1/4'' hex bits (Wera connection series 1 and 4) Chromium-vanadium

Bit-Check 6 Wood TX HF 1, 6 pieces Particularly suitable for wood applications For TORX® socket screws With holding function for TORX® screws Also suitable for Würth ASSY screws and Altenloh SPAX T-STAR plus screws 50-mm bits Take it easy tool finder

Self AC/DC-LED power supply unit CV 150 W IP20 Features: Independent operating device Protection class II, SELV output Non-dimmable Constant voltage Low idle power For LED applications Protected against overload, short circuit and extreme temperatur

Compact LED switching power supplies from SELF electronics - the right power supply for every application. Independent operating device Protection class II, SELV output Constant voltage Triac, dimmable Flicker-free design IP 20 Protected against ove

flat 24 V LED transformer - for connecting 24 V LED lamps to 230V electronic transformer with no minimum load is approved for installation in furniture ballast for LEDs provides constant 24 V output voltage - suitable for parallel connection total watt

6 Wera TORX bits tidily arranged in a minimum of space in a practical Bit-Check. Tough viscous Wera bits for hexagon head screws and universal use. 1 universal holder 893/4/1 K for insertion in the power screwdriver or for use in the chuck of the electri

Self AC/DC-LED power supply unit CC 23 W IP20 Dali-2 Features: Independent operating device Dimmable Interfaces: Dali-2 Contrast current Protection class II, SELV output Output current can be selected Low idle power For LED applications Protected

Self AC/DC-LED power supply unit CV+CC 6 W IP20 Features: Independent operating device Protection class II, SELV output Flicker-free design Non-dimmable Constant current + constant voltage IP20 Protected against overload, short circuit, over-voltage

V-TAC’s Ruby Series Data Cable, smooth finish with cotton fabric material. High speed transmission Fast Sync - Fast Charging (2.4A) Designed with highly durable copper plating interface, with effi cient and ergonomic tip. Easy to plug & unplug.

Goobay LED transformer, 24 V (DC)/30 W 24 V DC for LEDs up to 30 W total load Direct current source for LEDs with electronic ballast Flat design for space-saving installation Approved for installation in furniture Secure electronic isolation in accorda

High-quality LED transformer for reliable lighting The Self Electronics LED transformer provides a reliable power supply for your LED applications. Features Independent operating device Protection class II, SELV output Constant voltage IP20 Protected