Miscellaneous - SanDisk, Wera (66)

Bit holder for countersinking screws in flush with the surface of wooden decking boards With variably adjustable screw depth limiter Felt ring (replaceable) prevents traces of grinding on the decking surface Also included: two spare felt rings Output: S

Universal holder for the take-up of bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. ¼ hexagon, suitable for power screwdrivers with a take-up as per DIN ISO 1173-F 6.3.

One Rapidaptor bit holder with quick-release chuck, 29 BiTorsion bits for long life, diamond-coated (BDC) for secure screw fit. One of the biggest problems with mechanical screw fittings is that the screwdriver quickly slips out of the screw head. Screw h

Universal holder for the take-up of bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3. Quick-release chuck for rapid bit change. ¼ hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

One bit holder Rapidaptor with quick-release chuck, 11 BiTorsion bits for long service life, diamond-coated (BDC) for secure grip in the screw. One of the greatest problems for machine screwing is that the tool easily slips out of the screw head. As a res

Universal holder for the take-up of bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3. Quick-release chuck for rapid bit change. ¼ hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

8-piece set, with strong permanent magnet, in convenient belt pouch. Drive: 1/4'' hexagon for machine receiver Output: 1 x 7.0x50.0 1 x 8.0x50.0 1 x 10.0x50.0 1 x 12.0x50.0 1 x 13.0x50.0 1 x 1/4''x50.0 1 x 5/16''x50.0 1 x 3/8''x50.0

6 Wera Pozidriv* bits tidily arranged in a minimum of space in a practical Bit-Check. Tough viscous Wera bits for hexagon head screws and universal use. 1 universal holder 893/4/1 K for insertion in the power screwdriver or for use in the chuck of the e

Kraftform Kompakt Stubby Magazine 4, 6 pieces Use: Suitable for bits with 1/4-inch hexagon drive in line with DIN ISO 1173-C 6.3 and Wera Connection Series 1 Design: Bit holder with strong permanent magnet, bits, tough (Z), for universal use. Handle: Kraf

Maximum performance for your NAS Boost the performance and speed of your NAS system with the WD Red™ SA500 NAS SATA SSD. Your NAS system runs around the clock. A highly reliable drive is therefore essential. Unlike conventional SSDs, WD Red NAS SATA SSDs

Get SSD performance with 520 MB/s read speed in a mobile drive Reliable storage for backing up content and reminders Robust drive with fall safety from a height of up to two metres Robust rubber hook for attaching to belt loops or backpacks From SanDi

Application: Manually operated nut spinner sockets Output: 3/8'' external square Drive: 5/16'' external hexagon

Get the gaming ultimate cutting edge Get the ultimate gaming advantage with cyber-fast speeds of up to 7300 MB/s for superior performance and extremely fast loading times. Ultra-low latency speeds up graphics loads and keeps stutters and lags to a minimu

Maximum performance for your NAS - Red Power combined with SSD performance Highlights: Storage is optimised for caching in NAS systems to enable quick access to your most frequently used files Superior endurance can handle the heavy read and write loads

Bit-Safe 61 Universal 4, 61 pieces 61 pieces 1 universal holder 899/4/1 K for holding in the power tool or for use in the drill chuck of the electronic power drill.

Bits und Halter-Set, besonders geeignet für die Holzbearbeitung. Die Bits 867/1 TORX® HF halten durch ihre spezielle Geometrie TORX® Schrauben nach Spezifikation Acument Intellectual Properties sicher auf dem Werkzeug! Das ist besonders hilfreich in schwe

One Rapidaptor universal holder with ring magnet and quick-release chuck, 11 bits, torsion-style design (T) to reduce premature wear, tough, for universal use, extra-hard (H). Bits can be inserted easily, they then lock into place automatically. Easy bit

Application: Manually operated nut spinner sockets Output: 1/4'' external square Drive: 1/4'' external hexagon

1 universal holder with stainless steel case, retaining ring and strong permanent magnet, 11 bits, tough, for universal use. Bit-Checks can be stood on the workbench so your tools are always close to hand. Wera Bit-Checks are extremely compact making the

29 bits. Rapidaptor holder to ensure fast bit replacement. Universal holder for all applications. Contents: 1 x 1/4''x50 2 x PH 1x25 3 x PH 2x25 1 x PH 3x25 2 x PZ 1x25 3 x PZ 2x25 1 x PZ 3x25 1 x TX 10x25 1 x TX 15x25 1 x TX 20x25 1 x TX 25x25 1 x TX 30x

One Rapidaptor bit holder with quick-release chuck, 29 BiTorsion bits for long life, diamond-coated (BDC) for secure screw fit. Bits can be inserted easily, they then lock into place automatically. Easy bit removal without additional tools. Even small bit

T-handle bit holder with ratchet function and Rapidaptor quick-release chuck Application: Suitable for bits with 1/4'' external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera Connection Series 1 and 4 Design: Ratchet integrated in the handle w

Application: Manually operated nut spinner sockets Output: 1/2'' external square Drive: 5/16'' external hexagon

Maximum performance for your NAS - Red Power combined with SSD performance Highlights: Storage is optimised for caching in NAS systems to enable quick access to your most frequently used files Superior endurance can handle the heavy read and write loads

One Rapidaptor bit holder with quick-release chuck, 29 BiTorsion bits for long life, tough, for universal use. BiTorsion bits undergo a specific heat treatment which reduces the hardness of the shaft in comparison to the drive tip by about 20%. This torsi

6 50 mm-long Wera bits tidily arranged in a minimum of space in a practical Bit-Check. The tough viscous bits are suitable for universal use. In the case of the Torsion bits (TZ), torque peaks are additionally absorbed in the Torsion zone. This prevent

Particularly small bitholding screwdriver with extremely short bit mounting for hard to reach areas. With ratchet function and fine toothing for a low return angle. Easy-to-operate reversible ring (right, fixed, left). Includes 6 tough, universal bits, wh

Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent m

29 bits and 1 Rapidaptor stainless steel bit holder: stainless tools minimise the formation of rust on stainless steel screws 3888/4/1 K 1 x 1/4''x50 3851/1 TS PH 1 x PH 1x25 3 x PH 2x25 1 x PH 3x25 3855/1 TS PZ 2 x PZ 1x25 3 x PZ 2x25 1 x PZ 3x25 3867/1

7-piece toolkit. For professional screwdriving/professional fine adjustment AND torque-controlled screwdriving. Slip-over and therefore safe torque mechanism with quick adjustment for clockwise/anticlockwise and five selectable tightening torques (2.0, 3.

1x Rapidaptor universal holder with ring magnet and quick-release chuck, 29x bits, 867/1 TORX® HF with holding function for internal TORX® screws in accordance with the Acument Intellectual Properties specification, also suitable for Würth ASSY screws and

Durability up to 900 TBW Easily increase productivity and implement your creative ideas with PCIe® Gen 4.0 and its read speeds of up to 4150 MB/s (1 TB and 2 TB models). Large files are no longer a problem with Western Digital's nCache 4.0 technology, w

Get the gaming ultimate cutting edge Get the ultimate gaming advantage with cyber-fast speeds of up to 7300 MB/s for superior performance and extremely fast loading times. Ultra-low latency speeds up graphics loads and keeps stutters and lags to a minimu

Get the gaming ultimate cutting edge Get the ultimate gaming advantage with cyber-fast speeds of up to 7300 MB/s for superior performance and extremely fast loading times. Ultra-low latency speeds up graphics loads and keeps stutters and lags to a minimu

Bit-Check 12 Wood TX HF 1, 12 pieces Particularly suitable for wood applications 867/1 TORX® HF bits with holding function for TORX® screws in accordance with the Acument Intellectual Properties specification Also suitable for Würth ASSY screws and Alte

One Rapidaptor bit holder with quick-release chuck, 49 BiTorsion bits for long life, diamond-coated (BDC) for secure screw fit, tough (BTZ), for universal use, extra hard (BTH), 11 bits, tough (Z), for universal use. One of the biggest problems with mecha

Universal holder for the take-up of bits with ¼ hexagon head drive as per DIN ISO 1173-C 6.3. Quick-release chuck for rapid bit change. The strong permanent magnet holds the bits absolutely securely. ¼ hexagonal, suitable for power screwdrivers with ta

6 50 mm long Wera Torx bits clearly arranged in the smallest space in the practical bit check. The tough bits are suitable for universal use. Contents: 6x 867/4 Z TORX® bits: TX 10x50, TX 15x50, TX 20x50, TX 25x50, TX 30x50, TX 40x50.

Reliable, fast and plenty of capacity SanDisk-a pioneer in solid state storage technologies and the brand trusted by professionals-delivers improved speed and performance with the SanDisk SSD Plus. With sequential read speeds of up to 545 MB/s, this solid

Bit set, ideal for woodworking. The 867/4 TORX® HF bits have a special geometry that ensures that TORX® screws are held securely on the tool in accordance with the specifications of Acument Intellectual Properties. This is particularly useful in difficult