11 (102)

Precision pliers for fine assembly work, e g. in electronics and fine mechanics. for gripping, holding and bending sturdy, zero backlash box joint smooth ground gripping surfaces edges carefully deburred low-friction double spring for gentle and even

Knipex profi-key The indispensable multi-tool for craftsmen in the sanitary, air-conditioning, heating, ventilation, interior design, window and door manufacturing sectors as well as for caretakers. • Square 5/7/8 mm • Square 9 mm • Conical square from 4

Positioning tweezers for holding, inserting, and pulling: With dimensionally adapted shapes, the gripping surfaces are ideally suited for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore b

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Head chrome-plated, handles VDE-insulated 1000 V. Stripping values: 0.5 to 5 mm diameter

Knipex coated-wire stripping tweezers for removing paint insulation on copper wiring with diameter of approximately 0.6 mm. With interchangeable knives, spring steel, plastic grips. Length: 120 mm

Switch cabinet key for common cabinets and shut-off systems For all common shut-off systems in gas, water and electricity supply, as well as for technical equipment in buildings such as air-conditioning and ventilation systems, stop valves, mains switchbo

pliers chrome plated, handles with multi-component grips

Equipped with twelve KNIPEX tools, a total of 13 brand name tools, partly VDE-tested according to DIN EN 60900. Compact tool bag for the service technician. As insert bag suitable for: ''Basic'' 00 21 05 LE, ''BIG Basic Move'' 00 21 06 LE, ''BIG Twin Move

For fitting grip rings on shafts from 1.5 - 30 mm dia. with opening spring solid style, forged non-slip, solid tips pliers body and tips: chrome vanadium steel, forged, oil-hardened for rings of 1.5 - 4.0 mm dia.

pliers black atramentized, head polished, handles with multi-component grips

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 140 mm Head chrome-plated. Stripping values: 0.1 to 0.8 mm diameter

Heavy-duty and hard-wearing gripping pliers. different jaw styles chrome vanadium electric steel, forged, oil-hardened

Heavy-duty and hard-wearing gripping pliers. different jaw styles chrome vanadium electric steel, forged, oil-hardened

Electronics end-cutting nippers Precision nippers for precise cutting tasks such as in electronics and precision engineering. Box precision joint Low-friction double spring for gentle and smooth opening The polish or mirror finish in conjunction with a f

ESD cutting tweezers, particularly sharp and hard: ideal for copper, gold, silver and magnetic wire and are also available in ESD variants. Design: matt Tip width (B): 10 mm Tweezer tip style: cutting Corrosion resistant: yes Medical industry: yes Science

Multi-function key for actuation of closures in the areas of building technology (heating and sanitary facilities, air-conditioning and ventilation equipment, electrical engineering), gas and water supply and shut-off systems. • 8-beam version: 2x 4-way w

Universal key for common cabinets and shut-off systems For locking systems in electrical engineering, the supply of gas and water, air-conditioning and ventilation systems, industry, technical installations in buildings etc. 9 different closures produced

For fitting grip rings on shafts from 1.5 - 30 mm dia. with opening spring solid style, forged non-slip, solid tips pliers body and tips: chrome vanadium steel, forged, oil-hardened for rings of 1.5 - 4.0 mm dia. with adjustable stop screw to prevent

Precision pliers for fine assembly work, e g. in electronics and fine mechanics. for gripping, holding, bending and adjusting tips precision ground smooth gripping surfaces edges carefully deburred lap joint high-grade special tool steel, forged, oil

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Polished head Stripping values: 0.5 to 5 mm diameter.

For safe handling of electronic components in fine applications: Allows controlled compensation of potential differences between operator and component Maximum comfort for frequent use Handles suitable for use in cleanrooms and controlled environments For

High bending strength of the pliers tips. gripping surfaces cross-hatched, knurled vanadium electric steel- forged, oil-hardened

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross section easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut Special tool steel

Precision circlip pliers For internal circlips from 12 to 25 mm in diameter Length 140 mm, straight. Wear protective goggles when working with retaining rings.

Telephone pliers by Knipex. gripping surfaces cross-hatched, knurled chrome vanadium electric steel, forged, oil-hardened

25 % less effort required compared to conventional concreters' nippers of the same size. extra-slim form for tying deep mounted steel rods to lace concrete reinforcing steel with binding wire from a roll wire is twisted and cut in a single pass high-lev

MEAN WELL power supply, APC-8-series Output voltage: 11-23 V Output current: 350 mA Power: 8.05 W Ripple & noise: 300 mVpp Efficiency: 81.5% Constant current design Universal AC input / Full range Class II power unit, no FG Fully isolated plastic c

This cable by Delock allows the connection between USB devices, such as memory sticks or external hard drives, and mobile devices equipped with a Micro USB port. The OTG function enables a direct data transfer between the mobile device and the USB device,

pliers black atramentized, head polished, handles plastic coated

Precision circlip pliers For external circlips from 19 to 60 mm in diameter Length 180 mm, straight. Wear protective goggles when working with retaining rings.

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

This Delock USB 2.0 cable is used to connect active USB devices with USB type B sockets, such as printers, external HDD enclosures etc., to a free USB type A port. The double-shielded cable and the higher cross-section power line ensure a reliable connec

Electronics side-cutting pliers For precise cutting tasks such as in electronics and precision engineering. Stress-optimised design for a more direct working feeling. Robust, box and play-free joint Low-friction double spring for gentle and smooth openin

For locking systems in electrical engineering, the supply of gas and water, air-conditioning and ventilation systems, industry, technical installations in buildings etc. Nine different closures produced from die-cast zinc in a key ''Construction'' versi

Cutting tweezers, particularly sharp and hard: ideal for copper, gold, silver and magnetic wire and are also available in ESD variants. Design: matt Tip width (B): 10 mm Tweezer tip style: cutting Corrosion resistant: yes Precision mechanics industry: yes

Knipex switch cabinet key, short version For all common shut-off systems in gas, water and electricity supply, as well as for technical equipment in buildings such as air-conditioning and ventilation systems, stop valves, mains switchboards etc. Square 6

Electronics stripping scissors for cutting and stripping single, multiple and fine-stranded conductors with diameters up to 1.0 mm Easy adjustment to the desired wire or wire strand diameter via knurled screw and lock nut • With opening spring • Special

Precision circlip pliers For internal circlips from 8 to 13 mm in diameter Length 140 mm, straight. Wear protective goggles when working with retaining rings.

25 % less effort required compared to conventional concreters' nippers of the same size. extra-slim form for tying deep mounted steel rods to lace concrete reinforcing steel with binding wire from a roll wire is twisted and cut in a single pass high-lev