11 (1,108)

Radial electrolytic capacitor, 22 µF/35 V

Halogen transformer 150VA, 230V / 11.6V, terminals Encapsulated halogen transformer, 11.6V version with secondary terminals. Primary side with 70 cm moulded white euro mains cable. These halogen transformers meet European Standard EN 60742 (DIN VDE 0551)

VITROHM ceramic high-load wirewound resistors • Coil on a fibreglass body with special direct contacting, temperature resistant • Housing made of a ceramic tube sealed with cement Series KH216 - 8

Blind nut The elastic, vibration-damping connection for easily damaged materials. Blind nuts are not electrically conductive, and are used from one side only. In straightforward screw-down assembly, the elastic body forms a close-fitting lockhead. In blin

Metal film precision chip resistors Type: ERA Design: 0603 • High reliability: very stable at high temperatures and humidity • High accuracy: small resistance tolerance and low temperature coefficient • High performance: low noise and excellent linearity

Always right on time - chronometric accuracy provided by Varta watch batteries.

This WIFI aerial can be connected to WIFI devices with RP-SMA connectors to receive and transmit signals. Technical data • WIFI external aerial with pivoted joint, swivelling • RP-SMA plug • Frequency ranges: 2.4000 - 2.4835 GHz, 5.1500 - 5.8750 GHz • Aer

Reliable bend and kink protection • Protects your cables • Functional reliability • Holds flexible cables in place

Metal layer precision chip resistors Type: ERA A • High reliability: very stable at high temperature and humidity • High accuracy: small resistance tolerance and small temperature coefficient • High performance: low noise and excellent linearity • Standar

11-Watt high-load wire-wound resistor

Energy-saving and long-lasting - LED lighting from Osram. Product benefits: Long life of up to 15,000 h Low energy consumption Easy lamp replacement thanks to compact design Good all-round light emission LED alternative to conventional R7s lamps Appli

Metal layer precision chip resistors Type: ERA A • High reliability: very stable at high temperature and humidity • High accuracy: small resistance tolerance and small temperature coefficient • High performance: low noise and excellent linearity • Standar

Renata silver oxide button cell with a high capacity, leak-proof and absolute voltage stability with 0% mercury.

- Tamron 11-20mm f/2.8 Di III-A RXD - Ultra wide-angle zoom Lens - Lens speed F/2.8 - outstanding image quality - quiet RXD autofocus: ideal for video - short close-up distance of only 15 cm at 11 mm focal length enables close-up shots with creative wide-

Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bo

For telecommunications and electrical technicians Roll-up bag made from durable polyester fabric With practical, adjustable quick-release fastener Equipped with eight pliers and three screwdrivers Pliers with chrome-plated heads and two-tone multi-comp

9835 foam insert 6007 Joker 11 set 1, without tools 1 durable foam insert, without tools, two-colour design for quick identification of missing parts, width x height x depth: 172 x 30 x 392 mm, replacement foam insert for Wera article 9735, suitable for

This precision metal film resistor series stands out due to its particularly small design, low noise levels, very low temperature coefficient and narrow tolerances.

Radial electrolytic capacitor, 4.7 µF/35 V

Always right on time - chronometric accuracy provided by Varta watch batteries.

The world's first mercury-free hearing aid battery Reliable and durable power for hearing aids. Individually packed and sealed in the practical Turn & Lock Pack. Turn the battery wheel, remove the batteries and close the tab on the back again. Large seal

11-Watt wire-wound resistor Manufacturer: Vitrohm Series 216 ­ 3

Thick film SMD resistor 0402

Particularly suitable for use in CATV systems, multi-switch systems, single cable solutions and SAT single systems. Low attenuation due to selective splitting of the frequency bands via filters. Connections for SAT (F) and TV/radio (IEC). Remote power sup

25 % less effort required compared to conventional concreters' nippers of the same size. extra-slim form for tying deep mounted steel rods to lace concrete reinforcing steel with binding wire from a roll wire is twisted and cut in a single pass high-lev

This S-code type M12 connector is suitable for AC power supply. Designed with 4 pins, i.e. 3+PE contacts with a rated current of 12 A at 630V AC, it is intended for the M12 connections used with our 220V LED luminaires. The M12 connector in the straight s

Adapter cable for the go-e charger Gemini flex 11 kW with 16-A CEE red connector (three-phase). The adapter allows connection to a 32-A CEE red socket (three-phase). The charging current is limited to 16 A by the go-e charger Gemini flex 11 kW. Charging p

RAMO 30 T offers tactile feedback with a clear click of a button by using the RAFI short stroke button MICON 5. It is particularly recommended for plant engineering due to the degree of protection IP 66/IP69K. RAMO 30 T require a mounting diameter Of 30.3

Standard quartz in SMD housing HC49-SMD. • Frequency: 11.059200 MHz • Mode: fundamental • Cl: 20 pF • Rsmax: 60 Ohms • Temperature coefficient: ± 30 ppm • Frequency tolerance: ± 50 ppm • Housing: HC49-SMD

12 x 11.2 mm hot glue sticks Suitable for WZ0051 (hot glue gun) For bonding, sealing and filling joints as well as for building and decoration projects around the house Drying time: 30 seconds Softening temperature: 85-90°C Operating temperature: 100-200°

10 mm LED indicator in a bright chrome fitting with a metallic reflector With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful soldering. Colour: green Installation diam.: 14 mm IP67, 230 V A

SCHURTER fuse holder • Suitable for SMD fuses type OMF63 / OMF125 / OMT125

Radial electrolytic capacitor, 47 µF/25 V

Positioning tweezers for holding, inserting, and pulling: With dimensionally adapted shapes, the gripping surfaces are ideally suited for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore b

3/8"" hexagon socket bit, HX 11 mm, 50-mm long Head made of chromium-silicon-manganese-molybdenum steel. Socket made of CrV steel.

Renata hearing aid battery type RENATA hearing aid batteries Mercury-free Optimised for hearing aids with wireless communication High longevity Blister back contains safety pictograms compliant with the IEC 60086 standard. Perforated blister allows yo

Type 2 3-m charging cable for electric vehicles (EV), in orange, up to 11 kW, 20 A, 3-phase, for charging hybrid and electric cars with a type 2 connection LAPP standard type 2 charging cables connect the electric vehicle to the charging station, charging

LED SMD lamp R7s 11 W 1250 lm WW 118 mm slim, dimmable The 11-watt tube-shaped LED illuminant with the R7s socket is characterised by good all-round light emission. In particular, it is perfectly suited for indirect illumination due to its high luminous f

Heavy-duty and hard-wearing gripping pliers. different jaw styles chrome vanadium electric steel, forged, oil-hardened

Technical data: Shank shape: HA (DIN6535) Version: 5xDC with internal cooling Spiral angle: 30° Coating: AlTiN Cutting material: LA40 Internal coolant supply: yes Feed direction: Z Cutting dia. DC: 11 mm Shank dia. DCON: 12 mm Length, useful LU: 5