Cable (306)

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

tool burnished, handles with multi-component grips Style 2: internal opening spring, protected and captive

Impact-resistant plastic enclosure • Universal stripping tool for coaxial cables RG 59, RG 6, RG 7, RG 11 • For stripping outer sheathing and interior insulation in a single process • Adjustable stripping blade for round cabling • Two stripping blades for

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5-10 mm².

Single-handed crimping lever pliers from KNIPEX For non-insulated cable shoes from 0.5 to 10.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and

tool burnished, handles with multi-component grips for cutting and shortening cable ducts, also for plastic material up to 4.0 mm thickness special lever transmission very effective blade geometry tool body: high-grade chrome vanadium electric steel, oil-

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. For industrial and outdoor The network cable is ideal for outdoor use and offers increased resistance to UV light, cold, heat, mois

Single-handed crimping lever pliers from KNIPEX For insulated cable shoes from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross section Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11 mm and 16 mm) easy adjust

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

One side of the cable is equipped with a 90°-angled USB type-C connector, and the other side of the cable features a USB type-A port Conforms to the USB 3.0/USB 3.2 Gen 1 standard (transfer rates up to 5 Gbps) Supports OTG For charging of and exchangin

For stripping all standard coaxial cables from 4.8 to 7.5 mm in diameter (such as for TV and satellite reception), also suitable for PVC-Flex 3 x 0.75 mm² With length scale from 5.0 to 20.0 mm Two-level, hinged stripping tool With opening spring and lo

Cable knife, VDE-tested 1000 V. Insulated blade backs, with protective cap. Length 180 mm

tool chrome plated, handles with dipped insulation, VDE-tested IEC 60900DIN EN 60900

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

Knipex cable knife with ergonomically designed safety handle, interchangeable blade with special cut. With hinged blade guard, integrated in handle, captive. VDE-insulated according to DIN EN 60900 up to 1000 V. Length: 185 mm

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of common cable connectors Included in delivery 97 90 21 (13) No. 97 52 36 KNIPEX PreciForce® 1 97 99 01 blade receptacles 25

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades. Length 215 mm, nickel-plated.

For cutting copper and aluminium single conductors as well as multiple stranded cables. not suitable for steel wire and hard drawn copper conductors precision ground, hardened blade clean and smooth cut without crushing and deformation easy cutting wit

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

For flat cables up to 12 mm in width For stripping all standard round and wet-room cables 4.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Stripping device for cross-sections of 0.8/1.5/2.5 mm² (AWG 20/16/14) With opening spri

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

head burnished, handles with multi-component grips

Cable knife with protective cap. VDE-tested 1000 V. Non-insulated blade backs. Length: 180 mm

For PVC-insulated flat cable up to max. width of 12 mm and 0.75 to 2.5 mm² Adjusts automatically to different conductor heights: therefore no damage to conductor Large stripping length possible Replaceable knives Smooth mechanical action Low weight Housin

Knipex crimping die For KN 97 43. For insulated cable shoes 10-16 mm².

Cable cutters with ratchet principle For copper and aluminium cable, one-handed operation, two-stage sprocket drive for easy cutting. Cuts smoothly and cleanly without crushing, also suitable for stripping. Can be used even in confined spaces. Not suitabl

head polished, handles insulated, extrusion plastic-coated, VDE-tested IEC 60900DIN EN 60900

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Ergonomically designed handle shape with pleasantly designed slip guard More safety due to non-slip soft components Good power transmission when pulling the knife through thumb cavity and ''finger hook'' at the end of the handle Transparent protective cap

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 20 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

shiverpeaks®-BASIC-S--Cable entry aid, nylon, 3 mm, 30m Use the cable entry aid to pull your cabling through ductwork effortlessly. An eyelet is provided on the nylon pull wire to fasten the cable to, and a guide spring to make it easier to negotiate ang

tool burnished, handles with multi-component grips

EBP-Earth Bonding Point, EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). Earthing point for mounting underneath the table top. EBP / Earth Bonding Point = A common connection point to which ESD control e

PCIe 3.0 standard 200-mm riser length Flexible riser cable with rubberised shielding Can be used universally or for IM-1 Pocket The RC-01 riser cable offers, for universal applications, the possibility of 200-mm long expansion of a motherboard PCIe x16

ESD discharge cable with integrated resistor. Spiral cable, 2x press-stud 10 mm/10 mm Length: 2.4 m

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Connecting cable, red/black, angled/straight 4 mm connection, for HIOKI multimeters from product series DT425x/DT428x or similar, CAT III 1000 V, CAT IV 600 V, 120 cm length

EPA suitable. For working in electrostatic protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to an earth potential. with 1 megohm safety resistor 2 push buttons 10 mm for mats or floor co