Cable (85)

KNIPEX cable shears with double blade Cuts smoothly and cleanly without crushing. For single and multi-strand copper and aluminium cable. Not suitable for steel wire and hard-drawn copper conductors. KNIPEX cable shears with double blade facilitates cutti

Knipex crimping die For KN 97 43. For insulated cable shoes 10-16 mm².

For stripping UTP and STP data cables 4.5 to 10.0 mm in diameter Stripping device for cross-sections of 0.2/0.3/0.8/1.5/2.5/4 mm² Two-level, hinged stripping tool With opening spring and locking pawl Mounting clip for secure storage Housing: Plastic,

tool burnished, handles with multi-component grips for cutting and shortening cable ducts, also for plastic material up to 4.0 mm thickness special lever transmission very effective blade geometry tool body: high-grade chrome vanadium electric steel, oil-

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

tool burnished, handles with multi-component grips

tool burnished, handles with multi-component grips

for cutting copper and aluminium single conductors as well as multiple stranded cables not suitable for steel wire and hard drawn copper conductors precision ground, hardened blades clean and smooth cut without crushing and deformation easy cutting wi

For Bowden cables and soft wire ropes (including V2A) up to diameter of 3.0 mm Light, clean cut thanks to special cutting edge shape Sickle-shaped cutting edges enclose the cut material and prevent splicing of the wire rope Little force needed owing to

With replaceable blade

• For cutting copper and aluminium cables, single and multi-wire • Not suitable for steel wire and hard-drawn copper conductors • Hardened precision-ground blades • Cuts smoothly and cleanly without crushing • Easy cutting with one-handed use • Clamping p

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 3 6A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: red

Accessory set for UTS3000A series - Spectrum Utility Kit NSMAJ-NJ-0.7M DC-6G cable x 1 NJ-NJ-0.7M DC-6G cable x 1 SMA-N-KJ-T DC-6GHz adapter x 2 N-BNC-JK DC-4GHz adapter x 2 2400 MHz-2500 MHz antenna x 2 824-960 MHz/1710-1990 MHz antenna x 2

Cable cutters with ratchet principle For copper and aluminium cable, one-handed operation, two-stage sprocket drive for easy cutting. Cuts smoothly and cleanly without crushing, also suitable for stripping. Can be used even in confined spaces. Not suitabl

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

head polished, handles insulated, extrusion plastic-coated, VDE-tested IEC 60900DIN EN 60900

Cable cutter insulated with multi-component casings, VDE-tested 250 mm For cutting copper and aluminium cables, single and multi-wire. Not suitable for steel wire and wire cable. Hardened precision-ground blades. Cuts smoothly and cleanly without crush

Ergonomically designed handle shape with pleasantly designed slip guard More safety thanks to non-slip soft components Good power transmission when pulling the knife through thumb recess and ''finger hook'' at the end of the handle Transparent protecti

with crimping pliers 97 52 36 and self-adjusting insulation stripper 12 42 195 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening wh

Sensor/actuator connection cable M12, A-coded, 5-pin, M12 connector straight - free cable end, PVC-C, gray, shielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and convey

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: yellow

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

shiverpeaks® BASIC-S cable pull-in aid, nylon, 4 mm, 60 m Use the cable pull-in aid to easily pull your cable through a conduit. There is an eyelet on the GRP pull wire. The enclosed wire loop allows you to attach the cable to the eyelet. The screw-on hea

Ergonomically designed handle shape with pleasantly designed slip guard More safety due to non-slip soft components Good power transmission when pulling the knife through thumb cavity and ''finger hook'' at the end of the handle Transparent protective cap

VDV II the universal wiring tester - cloud-connected with Bluetooth and report function for important basic testing to avoid connection problems. The VDI II cable tester is easy to operate and allows the rapid verification of the copper cable of voice, d

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 15 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

Accessory set for UTS5000A series 2.92J RF cable (UT-W03-40GHz) x 1 2.92-KKG double socket adapter (UT-C04-40GHz) x 2 MA-N-KJG adapter (UT-C03-18GHz) x 1 Accessory bag (UT-CK02) x 1

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

Combination/cable shears for copper and aluminium cable, with sharp, precision-ground blades, adjustable screwed joint. Length 140 mm Cutting force: Copper up to 10 mm in diameter Aluminium up to 24 mm in diameter

For stripping all standard coaxial cables from 4.8 to 7.5 mm in diameter (such as for TV and satellite reception), also suitable for PVC-Flex 3 x 0.75 mm² With length scale from 5.0 to 20.0 mm Two-level, hinged stripping tool With opening spring and lo

EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to a ground potential. cable with 1 megohm safety resistor with 2 push buttons 10/10 mm p

with crimping pliers 97 22 240 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

EBP-Earth Bonding Point, EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). Earthing point for mounting underneath the table top. EBP / Earth Bonding Point = A common connection point to which ESD control e

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

Cable jacket knife, VDE-tested up to 1000 V. Insulated blade backs, with protective cap and sliding shoe on blade tip, as a result, there is no damage to the inner conductor insulation. Length: 180 mm

For hard wire cables, also suitable for cabling and round steel • Precise, effortless screwed joint • With safety catch Special blade geometry prevents the wire cable fanning out Chrome vanadium high-performance steel, oil-hardened and tempered

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter