Cable (353)

Ergonomically designed handle shape with pleasantly designed slip guard More safety thanks to non-slip soft components Good power transmission when pulling the knife through thumb recess and ''finger hook'' at the end of the handle Transparent protecti

with crimping pliers 97 52 36 and self-adjusting insulation stripper 12 42 195 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening wh

Power connector cable for our LED light strips, 8 mm wide (type 3528) DC 5.5/2.1 mm Cable length 190 mm

Combination/cable shears for copper and aluminium cable, with sharp, precision-ground blades, adjustable screwed joint. Length 140 mm Cutting force: Copper up to 10 mm in diameter Aluminium up to 24 mm in diameter

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

Cable jacket knife, VDE-tested up to 1000 V. Insulated blade backs, with protective cap and sliding shoe on blade tip, as a result, there is no damage to the inner conductor insulation. Length: 180 mm

For hard wire cables, also suitable for cabling and round steel • Precise, effortless screwed joint • With safety catch Special blade geometry prevents the wire cable fanning out Chrome vanadium high-performance steel, oil-hardened and tempered

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

tool burnished, handles with multi-component grips Style 2: internal opening spring, protected and captive

Impact-resistant plastic enclosure • Universal stripping tool for coaxial cables RG 59, RG 6, RG 7, RG 11 • For stripping outer sheathing and interior insulation in a single process • Adjustable stripping blade for round cabling • Two stripping blades for

This bronze pendant light makes an ideal addition to our vintage range. The integrated cable is adjustable up to a maximum of 150 cm, meaning that it adapts perfectly to your requirements. The steel base is very robust and promotes long-term use. The uniq

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5-10 mm².

Single-handed crimping lever pliers from KNIPEX For non-insulated cable shoes from 0.5 to 10.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and

Power connector cable for our LED light strips, 10 mm wide (type 5050) DC 5.5/2.1 mm Cable length 190 mm

tool burnished, handles with multi-component grips for cutting and shortening cable ducts, also for plastic material up to 4.0 mm thickness special lever transmission very effective blade geometry tool body: high-grade chrome vanadium electric steel, oil-

Single-handed crimping lever pliers from KNIPEX For insulated cable shoes from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross section Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11 mm and 16 mm) easy adjust

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

For stripping all standard coaxial cables from 4.8 to 7.5 mm in diameter (such as for TV and satellite reception), also suitable for PVC-Flex 3 x 0.75 mm² With length scale from 5.0 to 20.0 mm Two-level, hinged stripping tool With opening spring and lo

Cable knife, VDE-tested 1000 V. Insulated blade backs, with protective cap. Length 180 mm

tool chrome plated, handles with dipped insulation, VDE-tested IEC 60900DIN EN 60900

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

Knipex cable knife with ergonomically designed safety handle, interchangeable blade with special cut. With hinged blade guard, integrated in handle, captive. VDE-insulated according to DIN EN 60900 up to 1000 V. Length: 185 mm

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of common cable connectors Included in delivery 97 90 21 (13) No. 97 52 36 KNIPEX PreciForce® 1 97 99 01 blade receptacles 25

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades. Length 215 mm, nickel-plated.

For cutting copper and aluminium single conductors as well as multiple stranded cables. not suitable for steel wire and hard drawn copper conductors precision ground, hardened blade clean and smooth cut without crushing and deformation easy cutting wit

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

For flat cables up to 12 mm in width For stripping all standard round and wet-room cables 4.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Stripping device for cross-sections of 0.8/1.5/2.5 mm² (AWG 20/16/14) With opening spri

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

head burnished, handles with multi-component grips

Cable knife with protective cap. VDE-tested 1000 V. Non-insulated blade backs. Length: 180 mm

For PVC-insulated flat cable up to max. width of 12 mm and 0.75 to 2.5 mm² Adjusts automatically to different conductor heights: therefore no damage to conductor Large stripping length possible Replaceable knives Smooth mechanical action Low weight Housin

Knipex crimping die For KN 97 43. For insulated cable shoes 10-16 mm².

Cable cutters with ratchet principle For copper and aluminium cable, one-handed operation, two-stage sprocket drive for easy cutting. Cuts smoothly and cleanly without crushing, also suitable for stripping. Can be used even in confined spaces. Not suitabl

head polished, handles insulated, extrusion plastic-coated, VDE-tested IEC 60900DIN EN 60900

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Ergonomically designed handle shape with pleasantly designed slip guard More safety due to non-slip soft components Good power transmission when pulling the knife through thumb cavity and ''finger hook'' at the end of the handle Transparent protective cap

The extension cable can be used to extend the space between the power supply and your first light point or to extend the space between lightpoints. Total maximum system length per power supply is 35 metres Plug in and light up your outdoor space Extension

LED light chain 10 mtr ''yarn spool'' with 100 LEDs, with USB charging cable with on/off switch. String of lights with a simple, neutral design provides the perfect magic of light for any occasion, all year round. Our elegant string of lights on a spool c