Cable (290)

The dog tie out cable is an ideal way to prevent your dog from escaping and keep them safe in your garden, yard, or any other outside area. Durable material: The hook is made of galvanised iron, making it corrosion-resistant and durable. Additionally, the

VALUE 9-pin 1: 1 cable Cable with two 9-pin D-Sub connectors Connects interfaces such as the serial IBM AT to a switch box All cables connected 1: 1 Plugged in connector enclosure

Connection 1: USB-C (connector) Connection 2: USB-C (socket) Complies with USB 3.2 Gen2 SuperSpeed+ Data rates: up to 10 GBit/s Supports Power Delivery 3.0 Power supply: up to 20 V, 5 A, 100 W 2x shielded Aluminium housing Colour: black/grey Gold

4-pin PWM Y cable for connecting 3 PWM fans to 1 PWM header on the motherboard

4-pin PWM Y-cable for connecting 2 PWM fans to 1 PWM header on the motherboard

5-m USB 3.0 extension on a computer's type A USB port Active extension cable bridges distances of up to 5 m Supports data transfer rates of up to 5 Gbit/s Power supply via the USB bus Plug and play The Lindy USB 3.0 Active Extension uses active electro

VGA connector VGA port nickel-plated maximum resolution: 1280x800 5.00 m round ABS black label Suitable for connecting laptops, desktops, monitors, projectors, TVs etc. Cables are equipped with finger screws This VGA cable can be used to extend the cable

This 10-m active extension can be used alone or as part of the Lindy USB 3.0 Active Extension System Pro. This is a modular solution that can combine multiple USB 3.0 active extension cables Pro and a USB 3.0 Active Extension Hub Pro to distribute USB sig

shiverpeaks® BASIC-S--USB-A extension Optical USB 3.2, Type-A connector to Type-A port, 15.0 m Thanks to the fibre optic cables, the signal attenuation is very low and there is no influence on the data line by electromagnetic interference. Connections: US

Cable with two 25-pin D-Sub connectors Connects devices such as a switchbox to a computer 25 cables connected 1: 1 Shielding cable, connected to the cable's foil shielding and both connectors Connector housing moulded with special plastic for optimum

Cable for connecting a monitor to a graphics card or a VGA distributor 14 cables and an additional shielding cable connected to the cable's foil shielding and both connectors Moulded connector housing Manual locking screws

The NA-SEC1 chromax.blue set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, multi

For connecting high-speed SATA hard disks in the PC housing. Cable for connecting hard disks using SATA technology Transfer rate of up to 6.0 Gbps (SATA II) 4-pin cable with ground leads Connections: Two internal 7-pin SATA connectors with snap-on clos

The NA-SEC1 chromax.green set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, mult

The NA-SEC1 chromax.yellow set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, mul

Cable with two 25-pin D-Sub connectors Connects devices such as a switchbox to a computer 25 cables connected 1: 1 Shielding cable, connected to the cable's foil shielding and both connectors Connector housing moulded with special plastic for optimum

Cable for connecting a hard disk via SATA 3.0 Gbps (SATA II), backwards compatible with SATA 1.5 Gbps (SATA I) 4-pin cable with ground leads Connections: two internal 7-pin SATA connectors Transfer rate up to 3.0 Gbps (SATA II) Cable with angled connec

This 8-m active extension can be used alone or as part of the Lindy USB 3.0 Active Extension System Pro. This is a modular solution that can combine multiple USB 3.0 active extension cables Pro and a USB 3.0 Active Extension Hub Pro to distribute USB sign

The NA-SYC1 chromax.blue set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

Cable with a 9-pin D-Sub port and a 25-pin D-sub connector Connects PCs to modems Connector housing moulded for optimum strain relief, no cable breaks Excellent shielding prevents data loss and electromagnetic interference Manual locking screws Gold-

Cable for connecting a monitor to a graphics card or a VGA distributor 14 cables and an additional shielding cable connected to the cable's foil shielding and both connectors Moulded connector housing Manual locking screws

Cable with a 9-pin D-Sub port and a 25-pin D-sub connector Connects PCs to modems Connector housing moulded for optimum strain relief, no cable breaks Excellent shielding prevents data loss and electromagnetic interference Manual locking screws Gold-

Cable for connecting a hard disk via SATA 3.0 Gbps (SATA II), backwards compatible with SATA 1.5 Gbps (SATA I) 4-pin cable with ground leads Connections: two internal 7-pin SATA connectors Transfer rate up to 3.0 Gbps (SATA II)

For connecting high-speed SATA hard disks in the PC housing. Cable for connecting hard disks using SATA technology Transfer rate of up to 6.0 Gbps (SATA II) 4-pin cable with ground leads Connections: Two internal 7-pin SATA connectors with snap-on clos

Cable with two 25-pin D-Sub connectors Connects devices such as a switchbox to a computer 25 cables connected 1: 1 Shielding cable, connected to the cable's foil shielding and both connectors Connector housing moulded with special plastic for optimum

Cable with two 25-pin D-Sub connectors Connects devices such as a switchbox to a computer 25 cables connected 1: 1 Shielding cable, connected to the cable's foil shielding and both connectors Connector housing moulded with special plastic for optimum

Cable with two 9-pin D-Sub connectors Connects interfaces such as the serial IBM AT to a switch box All cables connected 1: 1 Shielding cable, connected to the cable's foil shielding and both connectors

The USB-C extension cable EX-1408 extends your USB 3.2 Gen 2x1 line by 5 m. Up to three EX-1408 devices can be installed in series to achieve a maximum length of 15 m. In this case, an additional 5 V/1.5 A power supply will need to be installed. A connect

Miniature metal USB 3.2 Gen 1 hub with four ports. 20 cm USB-C cable. Input: USB 3.2 Gen 1 Output: USB 3.2 Gen 1, 4-port output PC connection: USB type C-M, fixed cable, 20 cm cable Power supply: via bus Design: Metal enclosure Miniature metal USB-C 3

Miniature metal hub USB 3.2 Gen 1 (USB 3.0) AXAGON HUE-M1A quickly and easily connects up to four USB devices to your laptop or computer. Input: USB 3.2 Gen 1 Output: USB 3.2 Gen 1, 4-port output PC connection: USB type A-M, fixed cable, 20 cm cable Po

Cable for connecting a hard disk via SATA 3.0 Gbps (SATA II), backwards compatible with SATA 1.5 Gbps (SATA I) 4-pin cable with ground leads Connections: two internal 7-pin SATA connectors Transfer rate up to 3.0 Gbps (SATA II)

Cable with two 9-pin D-Sub connectors Connects interfaces such as the serial IBM AT to a switch box All cables connected 1: 1 Shielding cable, connected to the cable's foil shielding and both connectors

The NA-SEC1 chromax.red set is a fan accessory kit that includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, multiple NA

Cable for connecting a monitor to a graphics card or a VGA distributor 14 cables and an additional shielding cable connected to the cable's foil shielding and both connectors Moulded connector housing Manual locking screws

The NA-SYC1 chromax.green set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

USB 3.2 Gen 1 USB-A connector USB-A port 5 Gbps Nickel-plated 3.00 m Round PVC Black Label Durable connector for fixed connection Copper cores for reliable data transmission Supports transfer rates up to USB 3.2 Gen 1 SuperSpeed (5 Gbps) This cable is s

Cable with two 9-pin D-Sub connectors Connects interfaces such as the serial IBM AT to a switch box All cables connected 1: 1 Shielding cable, connected to the cable's foil shielding and both connectors

The NA-SYC1 chromax.red set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time. M

The NA-SYC1 chromax.yellow set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time

Cable with two 25-pin D-Sub connectors Connects devices such as a switchbox to a computer 25 cables connected 1: 1 Shielding cable, connected to the cable's foil shielding and both connectors Connector housing moulded with special plastic for optimum