Cable (27)

This wired mouse with thoughtful design optimises the user experience with impressive precision and maximum ease of use. What's more, the 1.5 m cable length of this contoured mouse, which fits comfortably in your hand, ensures that you enjoy maximum freed

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 3 6A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: red

For fine labelling on cables Specially designed for ultra-fine writing, marking and labelling on various types of cables. Cable marker with bullet nib, permanent, waterproof ink. Product characteristics Available in four colours as wallet only Use: Ready

Manual winch, loads up to 800 kg can be easily moved or pulled with this manual winch. incl. 10 m wire rope and reverse twist lock easy to mount anywhere ideal for work, leisure and hobbies (boat, garden etc.) protected against corrosion by galvanizing

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: yellow

Anchor, metal, folding, with cable Folding anchor, grappling anchor Three serrated claws Locks via twist lock Dimensions (unfolded): approx. 15 x 19 cm (W x H) Dimensions (folded): approx. 7 x 19 cm (W x H) Cable: approx. 8 mm, 15 m Weight: approx. 950 g

shiverpeaks® BASIC-S cable pull-in aid, nylon, 4 mm, 60 m Use the cable pull-in aid to easily pull your cable through a conduit. There is an eyelet on the GRP pull wire. The enclosed wire loop allows you to attach the cable to the eyelet. The screw-on hea

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 15 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to a ground potential. cable with 1 megohm safety resistor with 2 push buttons 10/10 mm p

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

EBP-Earth Bonding Point, EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). Earthing point for mounting underneath the table top. EBP / Earth Bonding Point = A common connection point to which ESD control e

Earthing measurement cable, 4 mm connection, yellow, 50 m length, with cable reel

ESD discharge cable with integrated resistor. Spiral cable, 2x press-stud 10 mm/10 mm Length: 2.4 m

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Connecting cable, red/black, angled/straight 4 mm connection, for HIOKI multimeters from product series DT425x/DT428x or similar, CAT III 1000 V, CAT IV 600 V, 120 cm length

ESD discharge cable with integrated resistor. Spiral cable, 3 mm press-stud to 10 mm press-stud Length: 2.4 m

EPA suitable. For working in electrostatic protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to an earth potential. with 1 megohm safety resistor 2 push buttons 10 mm for mats or floor co

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

The tone generator is used to apply a tone signal to a pair of wires or a single conductor and track it with the Inductive Receiver (Model R180001). The tone generator allows technicians to identify a wire in the middle of a bundle at a switching distribu

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

The ÖLFLEX® CLASSIC 110 is a VDE-registered oil-resistant PVC control cable that can be flexibly used for a variety of applications. Flame-retardant in accordance with IEC 60332-1-2 Excellent chemical resistance Oil-resistant in accordance with DIN EN 5

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 20 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

Earthing measurement cable, 4 mm connection, red, 50 m length, with cable reel

shiverpeaks®-BASIC-S--Cable entry aid, nylon, 3 mm, 30m Use the cable entry aid to pull your cabling through ductwork effortlessly. An eyelet is provided on the nylon pull wire to fasten the cable to, and a guide spring to make it easier to negotiate ang

TITANEX H07RN-F 3G1.5, black, wound, in a film bag, tested to VDE 0285-525-2-21 The high-quality H07RN-F cable is ideal for use in moving devices and electrical installations. Its versatile applications range from construction sites to industrial applic