Cable (135)

USB 2.0 Hi-Speed extension cable, black USB 2.0 connector (type A) > USB 2.0 socket (type A) Suitable for devices with USB ports USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Cable extension compatible with USB-A connec

ESD discharge cable with integrated resistor. Spiral cable, 3 mm press-stud to 10 mm press-stud Length: 2.4 m

USB 2.0 Hi-Speed extension cable, black USB 2.0 connector (type A) > USB 2.0 socket (type A) Suitable for devices with USB ports USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Cable extension compatible with USB-A connec

Single-handed crimping lever pliers from KNIPEX For insulated cable shoes from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross section Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11 mm and 16 mm) easy adjust

USB 2.0 Hi-Speed cable, grey USB 2.0 connector (type A) > USB 2.0 connector (type B) High-speed data transmission up to 480 Mbit/s Suitable for many peripheral devices such as printers or scanners Technical data Connection, type: USB 2.0 connector (type

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of common cable connectors Included in delivery 97 90 21 (13) No. 97 52 36 KNIPEX PreciForce® 1 97 99 01 blade receptacles 25

USB 2.0 Hi-Speed cable 1.8 m, grey USB 2.0 connector (type A) > USB 2.0 connector (type A) USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Suitable for many mass storage and peripheral devices, such as hard drives or HUBs

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades. Length 215 mm, nickel-plated.

EPA suitable. For working in electrostatic protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to an earth potential. with 1 megohm safety resistor 2 push buttons 10 mm for mats or floor co

USB 2.0 Hi-Speed cable 3.0 m, black USB 2.0 connector (type A) > USB 2.0 connector (type A) USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Suitable for many mass storage and peripheral devices, such as hard drives or HUBs

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

Knipex cable knife with ergonomically designed safety handle, interchangeable blade with special cut. With hinged blade guard, integrated in handle, captive. VDE-insulated according to DIN EN 60900 up to 1000 V. Length: 185 mm

USB 2.0 Hi-Speed extension cable, black USB 2.0 connector (type A) > USB 2.0 socket (type A) Suitable for devices with USB ports USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Cable extension compatible with USB-A connec

Cable knife, VDE-tested 1000 V. Insulated blade backs, with protective cap. Length 180 mm

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

tool chrome plated, handles with dipped insulation, VDE-tested IEC 60900DIN EN 60900

USB 2.0 Hi-Speed cable 1.8 m, black USB 2.0 connector (type A) > USB 2.0 connector (type A) USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Suitable for many mass storage and peripheral devices, such as hard drives or HUBs

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

For cutting copper and aluminium single conductors as well as multiple stranded cables. not suitable for steel wire and hard drawn copper conductors precision ground, hardened blade clean and smooth cut without crushing and deformation easy cutting wit

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

USB 2.0 Hi-Speed cable, black USB 2.0 connector (type A) > USB 2.0 connector (type B) Suitable for many peripheral devices such as printers or scanners High-speed data transmission up to 480 Mbit/s Technical data Connection, type: USB 2.0 connector (type

USB 2.0 cable with two connectors, type A to B

For flat cables up to 12 mm in width For stripping all standard round and wet-room cables 4.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Stripping device for cross-sections of 0.8/1.5/2.5 mm² (AWG 20/16/14) With opening spri

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

USB 2.0 cable with two connectors, type A to B

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

head burnished, handles with multi-component grips

The Data Cable CAN Weco - SMA is the perfect communication cable for connecting a Weco lithium battery to an SMA inverter or charger. With a length of 4 m and a convenient RJ45 connection, it ensures stable and reliable data communication between the devi

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

USB 2.0 Hi-Speed extension cable 90°, black USB 2.0 socket (type A) > USB 2.0 socket (type A) 90° Suitable for devices with USB ports USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Cable extension compatible with USB-A c

USB 2.0 Hi-Speed extension cable, grey USB 2.0 connector (type A) > USB 2.0 socket (type A) Suitable for devices with USB ports USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Cable extension compatible with USB-A connect

Cable knife with protective cap. VDE-tested 1000 V. Non-insulated blade backs. Length: 180 mm

For PVC-insulated flat cable up to max. width of 12 mm and 0.75 to 2.5 mm² Adjusts automatically to different conductor heights: therefore no damage to conductor Large stripping length possible Replaceable knives Smooth mechanical action Low weight Housin

The ÖLFLEX® CLASSIC 110 is a VDE-registered oil-resistant PVC control cable that can be flexibly used for a variety of applications. Flame-retardant in accordance with IEC 60332-1-2 Excellent chemical resistance Oil-resistant in accordance with DIN EN 5

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

USB 2.0 Hi-Speed extension cable 90° USB 2.0 socket (type A) > USB 2.0 socket (type A) 90° Suitable for devices with USB ports USB 2.0 cable to sync and charge High-speed data transmission up to 480 Mbit/s Cable extension compatible with USB-A connecto