Cable (55)

Mac II complete cable lighting system made of metal The MAC II cable lighting system comes as a complete set, which consists of a 10 m cable, a transformer and five square spotlights. This cable lighting system is an installation-friendly installation con

Practical cable lighting system MacRound made from metal A stylish cable light system with cables of around five metres in length is practical for installation in a variety of rooms. The system is easy to install under the ceiling. Small spotlights can be

Eight-flame rope system Cardan as a basic set with rope and transformer Even large rooms can be illuminated with the eight-flame cable system Cardan. The lights of the rope system consist of two narrow metal rings surrounding a GU5.3 socket, and the rings

LED rope system Circle - a complete set for many rooms Circle is an LED wire system that is supplied as a complete set ready for connection. It consists of rope, transformer and five circular, flat luminaire heads that can be swivelled on the brackets and

Rope system Cardan - eight-flame complete set of rope, transformer and luminaires Unlimited design possibilities and a mounting option on the ceiling, a sloping roof or on the wall are offered by the Cardan rope system, which is supplied as a complete set

Rope system Cup - complete set of rope, 5 lights and transformer Rope systems can be used in a wide variety of rooms and offer a maximum of design possibilities. The five-lamp cable system Cup can be mounted on the ceiling, on a sloping roof and even on a

LED rope system Circle - a complete set for many rooms Circle is an LED wire system that is supplied as a complete set ready for connection. It consists of rope, transformer and five circular, flat luminaire heads that can be swivelled on the brackets and

LED rope system Frame as complete set consisting of five luminaires, rope and transformer The Frame rope system is supplied ready for connection as a complete set consisting of rope, transformer and five square luminaires. The individual luminaires, desig

LED rope system Frame as complete set consisting of five luminaires, rope and transformer The Frame rope system is supplied ready for connection as a complete set consisting of rope, transformer and five square luminaires. The individual luminaires, desig

LED rope system Frame as complete set consisting of five luminaires, rope and transformer The Frame rope system is supplied ready for connection as a complete set consisting of rope, transformer and five square luminaires. The individual luminaires, desig

Rope system Cup - complete set of rope, 5 lights and transformer Rope systems can be used in a wide variety of rooms and offer a maximum of design possibilities. The five-lamp cable system Cup can be mounted on the ceiling, on a sloping roof and even on a

Rope system Cardan as basic set with four lights, rope and transformer The four-lamp Cardan rope system is supplied ready for connection with transformer, rope and four luminaires. The light sources in the four sockets are surrounded by two narrow metal r

Attractive LED cable lighting system Spice Salt, 5 floodlights The LED cable lighting system Spice Salt is delivered as a complete set (including accessories such as cable, transformer, brackets) Assembly: max. 5 x 10 W GU5.3 Voltage: 230/12 V Transformer

Complete rope system Mac II with five spots The practical Mac II rope system is supplied as a complete set and represents a basic set which can be easily assembled with the help of the assembly instructions. Whether on the wall or ceiling is completely up

LED rope system Circle - a complete set for many rooms Circle is an LED wire system that is supplied as a complete set ready for connection. It consists of rope, transformer and five circular, flat luminaire heads that can be swivelled on the brackets and

Five-flame cable system Cone LED with adjustable luminaires With the Cone LED wire system, any room can be illuminated effectively and, above all, flexibly. Whether mounted straight, on the ceiling slope or angled - rope systems offer limitless design pos

Five-flame cable system Cone LED with adjustable luminaires With the Cone LED wire system, any room can be illuminated effectively and, above all, flexibly. Whether mounted straight, on the ceiling slope or angled - rope systems offer limitless design pos

Rope system Cup - complete set of rope, 5 lights and transformer Rope systems can be used in a wide variety of rooms and offer a maximum of design possibilities. The five-lamp cable system Cup can be mounted on the ceiling, on a sloping roof and even on a

7-bulb Wire Mac II cable lighting system in matt chrome The Wire Mac II cable lighting system is supplied as a complete set ready for connection. It consists of a 10 m long cable, seven lights with GU5.3 sockets that can be positioned anywhere on the cabl

The NA-SEC2 is a fan accessory set consisting of three fully sleeved NA-EC2 30cm Extension Cables for 3-pin fans. The NA-EC2 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required. Sco

The NA-SYC1 chromax.black set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 3 6A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: red

The NA-SYC1 is a fan accessory set consisting of two fully sleeved NA-YC1 Y-Cables for 4-pin PWM fans. The NA-YC1 Y-Cables make it possible to run two 4-pin PWM fans on a single fan header and to let the mainboard control the speed of both fans simultaneo

Ultra-slim design keyboard with Mac layout and USB-C connection Chiclet-style keyboard with Mac layout 1.8 m cable with USB-C connection Quick access to 13 frequently used Mac features Compact and slim enclosure Precise scissor mechanisms for an ideal

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: yellow

shiverpeaks® BASIC-S cable pull-in aid, nylon, 4 mm, 60 m Use the cable pull-in aid to easily pull your cable through a conduit. There is an eyelet on the GRP pull wire. The enclosed wire loop allows you to attach the cable to the eyelet. The screw-on hea

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 15 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

Extension cable, 5 m Height: 8.2 mm Width: 8.2 mm Length: 5000 mm Material: rubber

EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to a ground potential. cable with 1 megohm safety resistor with 2 push buttons 10/10 mm p

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

EBP-Earth Bonding Point, EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). Earthing point for mounting underneath the table top. EBP / Earth Bonding Point = A common connection point to which ESD control e

The NA-SEC1 is a fan accessory set consisting of three fully sleeved NA-EC1 30cm Extension Cables for 4-pin PWM fans. The NA-EC1 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required.

Earthing measurement cable, 4 mm connection, yellow, 50 m length, with cable reel

ESD discharge cable with integrated resistor. Spiral cable, 2x press-stud 10 mm/10 mm Length: 2.4 m

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Connecting cable, red/black, angled/straight 4 mm connection, for HIOKI multimeters from product series DT425x/DT428x or similar, CAT III 1000 V, CAT IV 600 V, 120 cm length

ESD discharge cable with integrated resistor. Spiral cable, 3 mm press-stud to 10 mm press-stud Length: 2.4 m

Triple bonded steel connectors for extreme torsion and tensile strength – glued, indented and crimped 5 meters of 100% splinter-proof rods 2 rod flexibilities for overhead, under floor, tight angled and obstructed runs Super tough ‘MIGHTY-FIX’ zinc pla

EPA suitable. For working in electrostatic protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to an earth potential. with 1 megohm safety resistor 2 push buttons 10 mm for mats or floor co

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue