Cable (192)

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5-10 mm².

Single-handed crimping lever pliers from KNIPEX For non-insulated cable shoes from 0.5 to 10.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and

Power connector cable for our LED light strips, 10 mm wide (type 5050) DC 5.5/2.1 mm Cable length 190 mm

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 15,0m

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. For industrial and outdoor The network cable is ideal for outdoor use and offers increased resistance to UV light, cold, heat, mois

Single-handed crimping lever pliers from KNIPEX For insulated cable shoes from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 10,0m

URail power supply cable, 2 m, max. 1000 W matt chrome The 230 V suspended power supply in matt chrome enables a light installation for systems suspended on a cable up to 2 m. This is ideal for rooms with high ceilings, as the light source can be suspend

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross section Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11 mm and 16 mm) easy adjust

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of common cable connectors Included in delivery 97 90 21 (13) No. 97 52 36 KNIPEX PreciForce® 1 97 99 01 blade receptacles 25

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades. Length 215 mm, nickel-plated.

ProRail3 accessory cable suspension, 3 m, black Problem solver: With this black wire cable rail suspension, the ProRail3 rail system can be mounted at a distance of up to 3 m from the ceiling. A system can also be installed in rooms with uneven ceilings,

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

Knipex cable knife with ergonomically designed safety handle, interchangeable blade with special cut. With hinged blade guard, integrated in handle, captive. VDE-insulated according to DIN EN 60900 up to 1000 V. Length: 185 mm

Linion accessories power supply cable grey The unique Linion light channel system sets new standards when it comes to custom room lighting. With its aesthetic and clean design, the system provides attractive and fluid lighting that combines maximum flexi

Signal light 220 V from MENTOR, LED Ø 5 mm Colour: red Connection: 10 cm cable VDE approval Protection class, front panel: IP40 Push-in fastening in the installation opening approximately Ø 10.3 mm Housing: transparent, white

Cable knife, VDE-tested 1000 V. Insulated blade backs, with protective cap. Length 180 mm

tool chrome plated, handles with dipped insulation, VDE-tested IEC 60900DIN EN 60900

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

URail power supply cable, 1 m, max. 1000 W matt chrome This 230-V cable supply in matt chrome be used anywhere in the system. It is one of just many modular parts from the URail series. A customised 230-V URail system can be designed when combined togeth

For cutting copper and aluminium single conductors as well as multiple stranded cables. not suitable for steel wire and hard drawn copper conductors precision ground, hardened blade clean and smooth cut without crushing and deformation easy cutting wit

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

Cable length 15 cm

For flat cables up to 12 mm in width For stripping all standard round and wet-room cables 4.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Stripping device for cross-sections of 0.8/1.5/2.5 mm² (AWG 20/16/14) With opening spri

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 20,0m

head burnished, handles with multi-component grips

URail power supply cable, 1 m, max. 1000 W white This 230-V cable supply in white can be used anywhere in the system. It is one of just many modular parts from the URail series. A customised 230-V URail system can be designed when combined together with

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

Cable knife with protective cap. VDE-tested 1000 V. Non-insulated blade backs. Length: 180 mm

For PVC-insulated flat cable up to max. width of 12 mm and 0.75 to 2.5 mm² Adjusts automatically to different conductor heights: therefore no damage to conductor Large stripping length possible Replaceable knives Smooth mechanical action Low weight Housin

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

LED light chain 10 mtr ''yarn spool'' with 100 LEDs, with USB charging cable with on/off switch. String of lights with a simple, neutral design provides the perfect magic of light for any occasion, all year round. Our elegant string of lights on a spool c

Linion accessories power supply cable black The unique Linion light channel system sets new standards when it comes to custom room lighting. With its aesthetic and clean design, the system provides attractive and fluid lighting that combines maximum flex

tool chrome plated, handles insulated with multi-component grips, VDE-tested Style 2: internal opening spring, protected and captive

Cable length 5 cm

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5 - 6 mm².

This umbra-grey pendant light makes an ideal addition to our vintage range. The integrated cable is adjustable up to a maximum of 150 cm, meaning that it adapts perfectly to your requirements. The steel base is very robust and promotes long-term use. The

15 cm cable length without connector