Cable (133)

Linion accessories power supply cable black The unique Linion light channel system sets new standards when it comes to custom room lighting. With its aesthetic and clean design, the system provides attractive and fluid lighting that combines maximum flex

ProRail3 accessory cable suspension, 3 m, black Problem solver: With this black wire cable rail suspension, the ProRail3 rail system can be mounted at a distance of up to 3 m from the ceiling. A system can also be installed in rooms with uneven ceilings,

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 15,0m

For stripping all standard coaxial cables from 4.8 to 7.5 mm in diameter (such as for TV and satellite reception), also suitable for PVC-Flex 3 x 0.75 mm² With length scale from 5.0 to 20.0 mm Two-level, hinged stripping tool With opening spring and lo

The NA-SYC2 is a fan accessory set consisting of two fully sleeved NA-YC2 Y-Cables for 3-pin fans. The NA-YC2 Y-Cables make it possible to run two 3-pin fans on a single fan header. Scope of Delivery 2x NA-YC2 Y-Cables

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 1,0m

Cable knife, VDE-tested 1000 V. Insulated blade backs, with protective cap. Length 180 mm

tool chrome plated, handles with dipped insulation, VDE-tested IEC 60900DIN EN 60900

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

Knipex cable knife with ergonomically designed safety handle, interchangeable blade with special cut. With hinged blade guard, integrated in handle, captive. VDE-insulated according to DIN EN 60900 up to 1000 V. Length: 185 mm

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of common cable connectors Included in delivery 97 90 21 (13) No. 97 52 36 KNIPEX PreciForce® 1 97 99 01 blade receptacles 25

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades. Length 215 mm, nickel-plated.

For cutting copper and aluminium single conductors as well as multiple stranded cables. not suitable for steel wire and hard drawn copper conductors precision ground, hardened blade clean and smooth cut without crushing and deformation easy cutting wit

Ultra-slim design keyboard with Mac layout Chiclet-style keyboard with Mac layout Quick access to 12 frequently used Mac features Compact and slim enclosure Precise scissor mechanisms for an ideal typing experience High weight due to integrated metal

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm. • Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spa

For flat cables up to 12 mm in width For stripping all standard round and wet-room cables 4.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Stripping device for cross-sections of 0.8/1.5/2.5 mm² (AWG 20/16/14) With opening spri

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

head burnished, handles with multi-component grips

Cable knife with protective cap. VDE-tested 1000 V. Non-insulated blade backs. Length: 180 mm

For PVC-insulated flat cable up to max. width of 12 mm and 0.75 to 2.5 mm² Adjusts automatically to different conductor heights: therefore no damage to conductor Large stripping length possible Replaceable knives Smooth mechanical action Low weight Housin

Knipex crimping die For KN 97 43. For insulated cable shoes 10-16 mm².

The NA-SEC2 is a fan accessory set consisting of three fully sleeved NA-EC2 30cm Extension Cables for 3-pin fans. The NA-EC2 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required. Sco

Cable cutters with ratchet principle For copper and aluminium cable, one-handed operation, two-stage sprocket drive for easy cutting. Cuts smoothly and cleanly without crushing, also suitable for stripping. Can be used even in confined spaces. Not suitabl

The NA-SYC1 is a fan accessory set consisting of two fully sleeved NA-YC1 Y-Cables for 4-pin PWM fans. The NA-YC1 Y-Cables make it possible to run two 4-pin PWM fans on a single fan header and to let the mainboard control the speed of both fans simultaneo

head polished, handles insulated, extrusion plastic-coated, VDE-tested IEC 60900DIN EN 60900

The NA-SYC1 chromax.black set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Ergonomically designed handle shape with pleasantly designed slip guard More safety due to non-slip soft components Good power transmission when pulling the knife through thumb cavity and ''finger hook'' at the end of the handle Transparent protective cap

ProRail3 accessory cable suspension, 3 m, silver Problem solver: With this silver wire cable rail suspension, the ProRail3 rail system can be mounted at a distance of up to 3 m from the ceiling. A system can also be installed in rooms with uneven ceiling

Linion accessories power supply cable grey The unique Linion light channel system sets new standards when it comes to custom room lighting. With its aesthetic and clean design, the system provides attractive and fluid lighting that combines maximum flexi

tool burnished, handles with multi-component grips

Perfect for your project! Do not stand in the dark anymore The new LED spotlights by OPTINICA LED are ideal companions for construction, renovations, or workshops, etc. They are available in powers of 20 W with 1600 lumens, 30 W with 2400 lumens and 50 W

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 3,0m

URail power supply cable, 2 m, max. 1000 W matt chrome The 230 V suspended power supply in matt chrome enables a light installation for systems suspended on a cable up to 2 m. This is ideal for rooms with high ceilings, as the light source can be suspend

URail power supply cable, 1 m, max. 1000 W white This 230-V cable supply in white can be used anywhere in the system. It is one of just many modular parts from the URail series. A customised 230-V URail system can be designed when combined together with

The Popular Choice – A wide range of rods and accessories for both domestic and commercial installations, this kit is set to become the best seller - 10 meters of 100% splinter-proof rods - 4 rod flexibilities for overhead, under floor, tight angled and o

URail power supply cable, 2 m, max. 1000 W matt black The 230 V suspended power supply in black enables the installation of suspended lighting systems with a cable up to 2 m in length. This is ideal for rooms with high ceilings, as the light source can b

tool burnished, handles with multi-component grips

• For cutting copper and aluminium cables, single and multi-wire • Not suitable for steel wire and hard-drawn copper conductors • Hardened precision-ground blades • Cuts smoothly and cleanly without crushing • Easy cutting with one-handed use • Clamping p