Cable (58)

OPI Nail Lacquer, 15 ml, Nail Varnishes for Women, A gorgeous manicure as though you’d just left the nail salon? The OPI Nail Lacquer nail polish lets you achieve it in the comfort of your own home. It coats the surface of the nail with a continuous layer

The NA-SEC2 is a fan accessory set consisting of three fully sleeved NA-EC2 30cm Extension Cables for 3-pin fans. The NA-EC2 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required. Sco

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

The NA-SYC1 chromax.black set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

With its textile sheath and 60 W PD Quick Charge, the 1-metre long Inter-Tech USB-C cable is ideal for charging and synchronising mobile devices. Thanks to the 90° angled connector, a space-saving connection is possible.

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 7,5m

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 3 6A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: red

Shielded PROFINET drag chain cable, M12 to RJ45 Ethernet connection cable with straight plugs. Pre-assembled IE wires M12, D-code, IP67, pin RJ45, IP20 Operating temperature: -40 to 70°C Length: 5 m

Cable length 15 cm

Energy (underground) cable NYY-5Jx1.5 mm² For use in dry and damp rooms as well as in the open in the ground and in water, in accordance with VDE 0271. 600/1000 V Colour: black 5-core 25 metres

The NA-SYC1 is a fan accessory set consisting of two fully sleeved NA-YC1 Y-Cables for 4-pin PWM fans. The NA-YC1 Y-Cables make it possible to run two 4-pin PWM fans on a single fan header and to let the mainboard control the speed of both fans simultaneo

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

Sensor/actuator connection cable M12, A-coded, 5-pin, M12 connector straight - free cable end, PVC-C, gray, shielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and convey

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: yellow

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 3,0m

shiverpeaks® BASIC-S cable pull-in aid, nylon, 4 mm, 60 m Use the cable pull-in aid to easily pull your cable through a conduit. There is an eyelet on the GRP pull wire. The enclosed wire loop allows you to attach the cable to the eyelet. The screw-on hea

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 30,0m

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 15 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

Ideal for bundling cables, no more knotting. Without appropriate cable protection, a cable can hardly withstand today's requirements in terms of abrasion resistance, tensile strength, dimensional stability or impact resistance. LogiLink's flexible cable

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 5,0m

50-cm-long cable, from internal USB 3.0 male to internal USB 3.0 female. Connections: 1x 20-pin pin header USB 3.0 male 1x 20-pin pin header USB 3.0 female Max. data transfer rate: 5 Gbit/s Length: 0.5 m Packaging: retail packaging (bag with round eyel

EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to a ground potential. cable with 1 megohm safety resistor with 2 push buttons 10/10 mm p

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

EBP-Earth Bonding Point, EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). Earthing point for mounting underneath the table top. EBP / Earth Bonding Point = A common connection point to which ESD control e

The NA-SEC1 is a fan accessory set consisting of three fully sleeved NA-EC1 30cm Extension Cables for 4-pin PWM fans. The NA-EC1 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required.

PCIe 3.0 standard 200-mm riser length Flexible riser cable with rubberised shielding Can be used universally or for IM-1 Pocket The RC-01 riser cable offers, for universal applications, the possibility of 200-mm long expansion of a motherboard PCIe x16

One side of the cable is equipped with a 90°-angled USB type-C connector, and the other side of the cable features a USB type-A port Conforms to the USB 3.0/USB 3.2 Gen 1 standard (transfer rates up to 5 Gbps) Supports OTG For charging of and exchangin

Earthing measurement cable, 4 mm connection, yellow, 50 m length, with cable reel

ESD discharge cable with integrated resistor. Spiral cable, 2x press-stud 10 mm/10 mm Length: 2.4 m

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Connecting cable, red/black, angled/straight 4 mm connection, for HIOKI multimeters from product series DT425x/DT428x or similar, CAT III 1000 V, CAT IV 600 V, 120 cm length

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 15,0m

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. For industrial and outdoor The network cable is ideal for outdoor use and offers increased resistance to UV light, cold, heat, mois

ESD discharge cable with integrated resistor. Spiral cable, 3 mm press-stud to 10 mm press-stud Length: 2.4 m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 10,0m

EPA suitable. For working in electrostatic protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to an earth potential. with 1 megohm safety resistor 2 push buttons 10 mm for mats or floor co

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue