Cable (36)

This DisplayPort cable by Delock is used to connect devices with a DisplayPort interface, such as monitors, projectors or televisions, to a PC or laptop. Supporting a maximum bandwidth of 32.4 Gb/s, content can be displayed in 8K Ultra HD (7680 x 4320 @ 6

The NA-SYC1 chromax.blue set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

The NA-SYC1 chromax.yellow set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time

With its textile sheath and 60 W PD Quick Charge, the 1-metre long Inter-Tech USB-C cable is ideal for charging and synchronising mobile devices. Thanks to the 90° angled connector, a space-saving connection is possible.

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 7,5m

The tesa Powerstrips® cable clip for easy fixing of cables in the home, home office and around the workplace. Product features • Brings order to the clutter of cables • Fixes cable up to a diameter of 8 mm* • Easy to mount without screws, dowels or nails

4-pin PWM Y-cable for connecting 2 PWM fans to 1 PWM header on the motherboard

For fine labelling on cables Specially designed for ultra-fine writing, marking and labelling on various types of cables. Cable marker with bullet nib, permanent, waterproof ink. Product characteristics Available in four colours as wallet only Use: Ready

Cable length 15 cm

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

4-pin PWM Y cable for connecting 3 PWM fans to 1 PWM header on the motherboard

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 3,0m

The connectors have been developed for use in systems-, control- and electrical equipment engineering. It is the responsibility of the user to check whether the connectors can also be used in other areas of application. To protect against unintentional op

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 30,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 5,0m

50-cm-long cable, from internal USB 3.0 male to internal USB 3.0 female. Connections: 1x 20-pin pin header USB 3.0 male 1x 20-pin pin header USB 3.0 female Max. data transfer rate: 5 Gbit/s Length: 0.5 m Packaging: retail packaging (bag with round eyel

The NA-SEC1 chromax.black set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, mult

PCIe 3.0 standard 200-mm riser length Flexible riser cable with rubberised shielding Can be used universally or for IM-1 Pocket The RC-01 riser cable offers, for universal applications, the possibility of 200-mm long expansion of a motherboard PCIe x16

One side of the cable is equipped with a 90°-angled USB type-C connector, and the other side of the cable features a USB type-A port Conforms to the USB 3.0/USB 3.2 Gen 1 standard (transfer rates up to 5 Gbps) Supports OTG For charging of and exchangin

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 15,0m

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. For industrial and outdoor The network cable is ideal for outdoor use and offers increased resistance to UV light, cold, heat, mois

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 10,0m

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

The NA-SEC1 chromax.red set is a fan accessory kit that includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, multiple NA

The tone generator is used to apply a tone signal to a pair of wires or a single conductor and track it with the Inductive Receiver (Model R180001). The tone generator allows technicians to identify a wire in the middle of a bundle at a switching distribu

The NA-SEC1 chromax.blue set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, multi

Cable length 15 cm

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

The NA-SYC1 chromax.green set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 20,0m

The NA-SEC1 chromax.green set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, mult

The NA-SEC1 chromax.yellow set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, mul

Cable length 5 cm

15 cm cable length without connector