Cable (1,298)

The antenna cable by Delock is suitable for connecting components of radio frequency technology. Specification Connectors: 1 x SMA plug > 1 x SMA plug Impedance: 50 Ohm Cable type: LMR195 Cable attenuation: 0.59 dB per meter @ 2.4 GHz / 0.93 dB per met

This cable by Delock can be used e.g. for installation in a panel or housing with D-Type opening and can be used to extend and connect various network devices. Strands with stripped ends can be connected without tools via the terminal block with push-butt

This cable enables you to connect DisplayPort devices e.g. a monitor to your PC. The DisplayPort is standardized universal connecting standard by VESA for the transfer of video and audiosignal. It can be applied for monitors, TV to computer, DVD-player an

This network cable by Delock is used to connect different network devices, such as a patch panel to a switch. The connector can be locked in the RJ45 jack, and the cable is protected against removal. At the same time, the socket is blocked and secured fro

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. Inner metal sheath The cable has a robust inner metal sheath and is therefore better protected against external influences and da

This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or Flash memories. atm Anschließen einer Festplatte wird das SATA Cable nach oben weggeführt. Specification SATA II specification Data transfer

This cable by Delock allows the extension of a PoweredUSB connection and can be used to connect various devices. The cable is used both for data transmission and for power supply of the connected device. Specification • Connectors: 1 x PoweredUSB male 24

These Delock cable holders allow clear and orderly organisation of exposed cables. It is self-adhesive and can be easily attached to any smooth surface, such as a desk or wall. Boasting a small round design, the cable holders fit discreetly in any room. S

This holder by Delock can be used to fix a cable sleeve with a diameter of 15.8 mm e.g. to a wall. Expandable via plug-in system The design of the holder allows many holders to be connected together to fix a variety of cable sleeves. The holder can be at

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. Drag chain suitability The high-quality processed cable supports up to 10 million bending cycles, therefore it is also suitable for

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. The angled plug enables a space-saving installation in tight spaces behind appliances or in network closets. Specification • Connect

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. With braided jacket The jacket provides excellent resistance to abrasion and protects the network cable from kinks and breaks. Thus

This USB cable by Delock enables the connection between a device with a USB 3.0 Type-A connector and a PC or a laptop equipped with a free USB port. Specification Connector: USB 3.0 Typ-A Plug > USB 3.0 Typ-A Plug Wire gauge: 28 AWG data line 24 AWG powe

This active USB cable by Delock can be used to extend a USB connection by 5 m. The cable has an additional DC power socket to which an optional power supply can be connected. This ensures optimum data transmission even when used with powerful devices such

This cable by Delock enables the connection of a DisplayPort monitor to a PC or laptop with USB-C™ or Thunderbolt™ 3 port, such as a MacBook or a Chromebook. The interface has to support the DisplayPort Alternate Mode. Specification Connectors: 1 x USB Ty

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. For industrial and outdoor The network cable is ideal for outdoor use and offers increased resistance to UV light, cold, heat, mois

This Delock serial cable can be used as an extension cable or connection cable for measuring instruments, POS systems, printers, IoT, RS-232 hubs and patch panels. The cable offers the option of connecting adjacent systems and devices to each other. Mini

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. With angled connector The angled plugs enable a space-saving installation in tight spaces behind appliances or in network cabinets.

This PoweredUSB cable by Delock can be used to connect a device with 2 x 4 pin port to a PC or hub with PoweredUSB 12 V port. It is suitable for connecting various POS devices such as printers and terminals, e.g. by IBM or other manufacturers. The cable i

This network cable by Delock can be used to extend and connect various devices and is suitable for 25/40GBASE-T Ethernet applications with a frequency of 2 GHz and a data transfer rate of up to 40 Gbps. Specification Connectors: 1 x RJ45 plug 1 x RJ45 jac

This cable marker clip by Delock can be used to mark cables with a cable diameter up to 6 mm, to distinguish them from each other. This can be individually labeled or provided with symbols. • Quantity: 3 pieces per poly bag 1 x blue 1 x yellow 1 x red • M

This cable by Delock enables the connection of a DisplayPort monitor to a PC or laptop with USB-C™ or Thunderbolt™ 3 port , such as a MacBook or a Chromebook. The interface has to support the DisplayPort Alternate Mode. Ultra flexible cable The cable

This cable by Delock can be used e.g. for installation in a panel or housing with D-Type opening. It can also be used to extend and connect various network devices. Specification Connectors: 1 x RJ45 plug 1 x RJ45 jack Cat.5e specification Shielded (STP

This holder by Delock can be used to fix a cable sleeve with a diameter of 18.5 mm e.g. to a wall. Expandable via plug-in system The design of the holder allows many holders to be connected together to fix a variety of cable sleeves. The holder can be at

This antenna cable by Delock enables the connection between radio frequency technology components. Specification Connectors: 1 x F jack bulkhead, 1 x SMB plug Thread length F jack: ca. 12.5 mm Impedance: 50 Ohm Cable category: coaxial Cable type: RG-3

This cable by Delock can be used to connect various control and measuring devices. The open cable ends allow customised cable assemblies to be made. Specification Connectors: 1 x RJ50 male 11 x open wires Shielded (S/FTP) Cable gauge: 26 AWG Length inc

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. Slim patch cable The thin patch cables are characterised by their small cable diameter and enable flexible and space-saving cabling

The antenna cable by Delock is suitable for connecting components of radio frequency technology. Specification • Connectors: 1 x MHF® I plug > 1 x MHF® I plug • Impedance: 50 Ohm • Cable type: 1.13 • Cable: coaxial • Cable attenuation: 3.2 dB @ 2.4 GHz pe

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. Slim patch cable The thin patch cables are characterised by their small cable diameter and enable flexible and space-saving cabling

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. Slim patch cable The thin patch cables are characterised by their small cable diameter and enable flexible and space-saving cabling

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. Super flexible and flat The RJ45 cable is ideal for laying under carpets, floors or behind wallpaper. The material of the cable she

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. Slim patch cable The thin patch cables are characterised by their small cable diameter and enable flexible and space-saving cabling

This PCI Express riser card by Delock is used to connect a PCI Express x8 card. The flexible cable allows a space-saving installation inside the computer case. Specification Connectors: 1 x PCI Express x8 male 1 x PCI Express x16 slot Supports PCI Expres

This PoweredUSB cable by Delock can be used to connect a device with 8 pin port to a PC or hub with PoweredUSB 24 V port. It is suitable for connecting various POS devices such as printers and terminals, e.g. by Epson, IBM, Wincor or HP. The cable is used

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. Super flexible and flat The RJ45 cable is ideal for laying under carpets, floors or behind wallpaper. The material of the cable she

This antenna mounting base by Delock enables antenna mounting, e.g. on a vehicle roof. Specification • Connector: 1 x M6 outer thread 1 x SMA plug • Impedance: 50 Ohm • Mounting type: screw mounting • Diameter mounting hole: ca. 11,0 mm • Suitable for mat

This high-quality Delock SATA cable is used for internal connection of various devices, such as hard disks, controller cards etc. It has a nylon braided sheath and gold-plated metal clips which snap into place when connecting the cable. Technical data • C

This network cable by Delock can be used to connect various devices and is suitable for 40GBASE-T Ethernet applications with a frequency of 2 GHz and a data transfer rate of up to 40 Gbps. With angled connectors The connectors can be angled in any direct

This cable by Delock is used to connect devices with a DisplayPort interface, such as monitors or TVs, to a PC or a laptop. 8K resolution and HDR support By supporting a maximum bandwidth of 32.4 Gbps , content up to 8K Ultra HD (7680 x 4320 @ 60 Hz) r

Fan connector cable, 4-pin plug-socket, 0.20 m This 4-pin cable is used to connect a fan to the motherboard • Cable length: approx. 0.20m System requirements • Motherboard with one free 4-pin port