Miscellaneous - Adata, AutoCell Electronics, MM Spray, Romagna Plastic, Sensor (875)

ESD discharge cable with integrated resistor. Spiral cable, 3 mm press-stud to 10 mm press-stud Length: 2.4 m

Pack of five jigsaw blades for metal Bayonet (T) shank Ref. no. T127D Serrated length: 75 mm Tooth pitch: 3.0 mm Example application: sheet metals 3 - 15 mm

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 12.0 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 5.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 2 pieces

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-C socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

16-mm HSS bi-metal hole saw for e.g.: PG 36 With variable tooth pitch. Cutting depth: 45 mm Overall height: 40 mm

Tool compatibility: For use with the WXMPS MS smart soldering irons and the Wxsmart soldering station Perfect for all micro and standard applications for micro and standard component sizes: Smart, active, high-performance soldering tips for micro and stan

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

Connection cable, axial connector - axial coupling (IEC), highly shielded, class A • Surge impedance 75 ohm• For radio and TV • Type in line with KDG 1 TS 152 (EN 60966-2-5) - Length 10.0 m

Uninsulated socket, diameter 4 mm, brass, nickel-plated. • Socket dia. 2 mm, unsprung • Connection: screws/soldering • Rated voltage: 60 V DC • Rated current: 16 A • Resistance: 5 mO • Colour: bare

ERSADUR soldering tip for i-CON TRACE soldering station

T-connector For branching tubes 90° in both directions For nylon, soft nylon, PUR tubes For water and compressed air

Corrugated and hardened teeth, HSS steel for saws, hacksaws, metal saws

0.6-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

Tool compatibility: For use with the WXMPS MS smart soldering irons and the Wxsmart soldering station Perfect for all micro and standard applications for micro and standard component sizes: Smart, active, high-performance soldering tips for micro and stan

High-performance cutting disc for aluminium and non-ferrous metals The special fillers prevent a clogging of the cutting disc, thus ensuring a high-performance, precise cut with high service life. The narrow wheel width reduces the creation of dust. Diame

Resealable PE protective pouch, electrostatically volume conductive. 10 - 100 KOhm Colour: black Size: 200 x 250 mm PU = Pack of 100

Longlife soldering tip for increased heat consumption with ERSADUR coating of the soldering stations ANANLOG 60 (0ANA60), ANANLOG 60 A (0ANA60A), ANANLOG 80 (0ANA80), ANANLOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with the solderin

Concrete drill bit, Power3000, ISO 5468 Area of use: Granite, concrete, stone, masonry, tiling, marble, clinker, lightweight materials. In self-service pouch.

Diamond-coated glass drill bits in spherical shape For drilling and machining glass and rock types up to granite. We recommending using on bench drilling machines with a speed of 2000/rpm with the addition of coolant. Shank diameter: 2.35.

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

Eratz soldering tip, T990 series for ATTEN ST-909 with integrated heating element.

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-A socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

0.9-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

2.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

ERSADUR soldering tip for the Tech Tool. • Pencil tip • 1.0 mm

Colour: transparent H x W x D: 47 x 55 x 79 To partition drawer 250-3, PSC 4-01, compact case and Carry-Lite 55 Made of polypropylene (PP).

micro USB spiral cable 1.0m, black Raspberry PI

Easy-Click 60 connector.

ERSADUR soldering tip for the Tech Tool. • Chisel-shaped • 3.2 mm

• Single potentiometer • Compact, robust potentiometer for audio and video applications

Four-piece milling cutter set (6 - 10 mm) Cutters of 6 mm, 7 mm, 8 mm and 10 mm. Four-flute design according to DIN 844. Shafts 6.0 or 10 mm. Made from HSS-Co5. Comes in a wooden box with sliding lid.

XT8 EXACT MINI The unbeatable professional tool for challenging tasks in thin sheet machining. The minimal burrs and the clean cuts mean that you can forget all about time-consuming follow-up work. The XT8 EXACT impresses with its outstandingly quiet oper

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.8 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 0.5 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

Staples for stapler 1000 pieces in a box

3.0mm carbide drill bit in a plastic box of 10. Precisely manufactured drill bit with high concentricity and stability. Reinforced shank of 3.175mm, length approx. 38mm. The distance from the tip to the top of the ring is 21 mm. The drill bit is ringed an

• Wheel adjustment along scale with metric and inch divisions • Nickel-plated for corrosion protection. • Measurement range: 125 mm • Total length: 180 mm

Reisser R2 — flat countersunk head, PZD Phillips, Pozidriv Hardened steel, blue zinc plated, sliding surface, RN 9200 VG, full thread Thread: 4.0 mm Length: 40 mm Content: 200

Technical specification: - USB 3.0 / USB 3.1 (Gen. 1) adapter - Connections: USB 3.0 plug A to USB-C™ socket - Nickel-plated connections with gold-plated contacts - Super-speed, up to 5 Gbit/s data transfer rate - USB 3.0 standard, downward compatible wit