Miscellaneous - Adata, AutoCell Electronics, MM Spray, Romagna Plastic, Sensor (875)

XNT tips for WXP 90/WTP 90/WXP 65/WP 65 soldering irons For soldering tasks with a high heat demand and large solder joints For optimum results Cost-effective alternative thanks to a wide range of soldering tips For universal applications with the most de

Reisser R2 — flat countersunk head, PZD Phillips, Pozidriv Hardened steel, blue zinc plated, sliding surface, RN 9200 VG, full thread Thread: 4.5 mm Length: 35 mm Content: 200

XT70 high-performance cutting disc for steel and stainless steel by RHODIUS. Low burr formation, high service life, iron- and sulphur-free. Diameter: 125 mm Width: 1 mm Interior hole: 22.23 mm Contents: 10 pieces

• high contrast • improved viewing angle • Controller ST7066U • Interface parallel • Technology STN

7.50-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

Tool kit for Favorit manual press. • Interior ø: 0.6 mm

USB-Konfektionsstecker, straight Suitable hood: USB HOOD A (not included in delivery)

If the bit has to be secured, e.g. for series fittings. Sleeve: Stainless steel. Output: For bits according to DIN 3126, ISO 1173 style C 6.3 Drive: DIN 3126, ISO 1173, style E 6.3.

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Blue • Length: 3.0m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 devices s

LT K soldering tip Soldering tip, chisel-shaped long, loose Width A: 1.2 mm Thickness B: 0.4 mm Length L: 21.0 mm Corresponding soldering family FE MPR WP WSP

Concrete drill bit set in plastic case 4/5/6/6/8/10/12 mm

Fibreglass fabrics are becoming increasingly popular due to their enormous versatility and countless possible applications. The advantages are high strength and resistance to chemicals and other environmental influences at a realistically low price. Due t

Isolated line laser module, red, 90°, 650 nm, 3 mW, 5 V DC

Contact cleaning pen for cleaning all types of contacts, terminal areas on PCBs, for erasing pencil and ink marks on tracing paper, for cleaning ink residues on stencils etc. Also ideal for fast, precise removal of oxidation on vehicles. - Holder measurin

CV wood drill bits Area of use: Softwood, hardwood, plywood, chipboard. Working length: 30 mm - 80 mm Total length: 60 mm - 130 mm

Chisel shape long 370°C, 3.2 mm for TCPS, TCP 12, TCP 24, TCP 42 and FE 50M soldering irons width A: 3.2 mm thickness B: 1.2 mm Item number: 4PTM7-1

Colour: transparent H x W x D: 47 x 39 x 55 To partition drawer 250-3, PSC 4-01, compact case and Carry-Lite 55 Made of polypropylene (PP).

Hexagonal ball-head bits Style: C 6.3 / 38 mm Blade size: 4.0 mm

1573 Pentalobe ESD Kraftform Micro Schraubendreher, PL 1,1 x 40 mm Anwendung: Pentalobe-Schrauben Klinge: Rund Ausführung: Nicromatt, Black Point Spitze Griff: Kraftform Micro mit Abrollschutz und drehbarer Kappe, mehrkomponentig. Mit Werkzeugfinder Take

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

Replacement soldering tip for WMRS soldering pencil. • Dot tip • 0.8 mm

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: blue

Massive very robust laser holder made of aluminum for industrial applications industrial grade Mounting can be adjusted in all degrees of freedom Base plate with 2 different mounting options: 1. hole for fastening to e.g. walls / ceilings 2. existing M5 i

90° HSS taper deburring countersink for M3 countersunk heads. 12.4 mm/M6 DIN 335 C HSS, with cylindrical shank and 3 blades, CBN deep-ground.

Magnetic test probes, red/black, 4 mm connection, CAT III 1000 V

Grinding wheel for working steel and wood

Tool compatibility: For use with the WXUPS MS smart soldering irons and the Wxsmart soldering station Perfect for all ultra soldering applications which require a lot of heat Thermal Core Technology delivers maximum power to the tip, 150 W provides maximu

6-mm carbon trimmer potentiometer with plastic housing and degree of protection IP 5 (dust-proof). The substrate in our SMD potentiometer is highly temperature-resistant and suitable for reflow soldering. Feature: • Self-extinguishing plastic parts in acc

High-performance cutting disc for aluminium and non-ferrous metals The special fillers prevent a clogging of the cutting disc, thus ensuring a high-performance, precise cut with high service life. The narrow wheel width reduces the creation of dust. Diame

Concrete drill bit, Power3000, ISO 5468 Area of use: Granite, concrete, stone, masonry, tiling, marble, clinker, lightweight materials. In self-service pouch.

RT UNI terrace screw, SIT 20, 7 mm small head, DRIBO drill tip Thread-Ø: 5,0 Length 80 mm Contents: 130 pieces

Active, optical USB 3.0 / USB 3.2 Gen 1 extension cable - with data transfer rates of up to 5GBit/s at a distance of up to 20m! - Active USB extension over 20 metres - Low cable cross-section thanks to fibre optics - Solid metal connector housing - The e

ERSADUR soldering tip for i-CON TRACE soldering station

Diamond cutting disc with turbo cutting edge. • Very short cutting time with a good service life. • Suitable for wet and dry cutting Diameter: 125 mm Width: 7.5 x 2.0 mm Inside hole: 22,23 mm Content: 1 piece

Tool kit for Favorit manual press. • Interior ø: 0.8 mm

Abrasive fabric disc by RHODIUS Never before have cleaning and polishing been so easy. For extremely powerful cleaning performance with absolutely powerful abrasion. Despite its aggressive removal rate, the SVS abrasive fabric disc guarantees that the wor

Lamellar flap grinding disc by RHODIUS. Excellent results on stainless steel and optimum results on steel. Fibre support, zirconium corundum Diameter: 125 mm Grain size: 60

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

LT AS soldering tip, 1.6 mm Round shape, loose Width A: 1.6 mm Thickness B: --- Max. length L: 13.5 mm Corresponding soldering family FE MPR WP WSP Replacement soldering tip for WSP 80 (WSD 81).

3.20-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch