Miscellaneous - Adata, MM Spray, Romagna Plastic (337)

1.4-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

Ersadur long-life soldering tip for Multitip C-25. • 45° bevelled

Socket with insulated head and ring for installation in equipment chassis and switch panels with a wall thickness up to 2 mm. 4 mm diameter tin-plated brass socket, with solder Connection and M6 thread. type: BIL 20 brown system: 4 mm colour: brown measur

THE 08202 SYH-LY LCD dot matrix modules - Dot matrix modules with 2 lines and 8 characters - high-contrast LCD-STN display - with LED backlighting - Character: black - Manufacturer: Display Elektronik - Connection to 4- or 8-bit data bus - Supply voltage:

Ideal for decorations on colourful materials or for concealing repairs on white materials. Glue sticks 250 mm, white, 250 g • For a wide range of materials such as paper, cardboard, felt, textiles and many others • Solvent-free, holds after 10 seconds and

Stannol solder wire crystal 511 Flux filled no-clean solder wire with clear residues Stannol crystal solder wires can be used for repair work and eliminate the need for a further cleaning process. They are characterized by the following properties: • Clea

Sparibo chipboard screw, DIN RN 9267 With ribs, self-drilling tip and star drive. The Sparibo chipboard screw is excellently suited to outdoor use, such as for fence construction, in wooden façades, with balcony and frame fittings, for formwork, and much

ERSADUR-LF soldering tip for the i-TOOL. ERSA i-Tip long-lasting soldering tip range with ERSADUR-LF coating for the soldering iron i-tool in the soldering station i-CON.Technical data: Long-lasting tip design: straight. Tip coating: LF-ERSADUR. Tip type:

Lamellar flap grinding disc by RHODIUS. Excellent results on stainless steel and optimum results on steel. Fibre support, zirconium corundum Diameter: 115 mm Grain size: 120

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

• high contrast • improved viewing angle • Controller ST7066 • Interface parallel • Technology STN

Socket with insulated head and ring for installation in equipment chassis and switch panels with a wall thickness up to 2 mm. 4 mm diameter tin-plated brass socket, with solder Connection and M6 thread. type: BIL 20 violet system: 4 mm colour: violet meas

Sparibo chipboard screw, DIN RN 9267 With ribs, self-drilling tip and star drive. The Sparibo chipboard screw is excellently suited to outdoor use, such as for fence construction, in wooden façades, with balcony and frame fittings, for formwork, and much

Stannol solder wire Crystal 511 Flux-cored No-Clean solder wire with transparent residues Stannol Crystal solder wires can be used for repair work and make any further cleaning process superfluous. They are characterised by the following properties: • Min

Lamellar flap grinding disc by RHODIUS. Excellent results on stainless steel and optimum results on steel. Fibre support, zirconium corundum Diameter: 115 mm Grain size: 60

SPBR Spare roll for working steel and wood

Longlife soldering tip for increased heat consumption with ERSADUR coating of the soldering stations ANANLOG 60 (0ANA60), ANANLOG 60 A (0ANA60A), ANANLOG 80 (0ANA80), ANANLOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with the solderin

VSK VISION Thanks to the unique combination of two special product properties, the VSK VISION offers clear advantages in the surface finishing of stainless steel. On the one hand, it combines an alternating abrasive cloth and non-woven abrasive fleece on

Moving coil measuring instrument, class 2.5 With mirror scale and zero-point correction, vertical installation Corresponding light kit: IS 26

Stannol solder wire Crystal 511 Flux-cored No-Clean solder wire with transparent residues Stannol Crystal solder wires can be used for repair work and make any further cleaning process superfluous. They are characterised by the following properties: • Min

Standard hot glue sticks

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Black • Length: 0.25 m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 device

Stannol solder wire crystal 511 Flux filled no-clean solder wire with clear residues Stannol crystal solder wires can be used for repair work and eliminate the need for a further cleaning process. They are characterized by the following properties: • Clea

ERSADUR soldering tips • Chisel-shaped/extended • 2.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80

6-mm carbon trimmer potentiometer with plastic housing and degree of protection IP 5 (dust-proof). The substrate in our SMD potentiometer is highly temperature-resistant and suitable for reflow soldering. Feature: • Self-extinguishing plastic parts in acc

LT D soldering tip Soldering tip, chisel-shaped, loose Width A: 4.6 mm Thickness B: 0.8 mm Length L: 13.5 mm Corresponding soldering family FE MPR WP WSP Replacement soldering tip for WSP 80 (WSD 81).

Replacement soldering tip • 4 mm

MBS 69, MINI bits Suitable for many specialist screws Bit length: 28 mm Specialist bits, 10 pieces Square 0-1-2 Triwing 0-1 Triangle 2.0 - 2.2 Five-star 1.4 - 1.8 0.8 pentalobe

Lamellar flap grinding disc by RHODIUS. Excellent results on stainless steel and optimum results on steel. Fibre support, zirconium corundum Diameter: 125 mm Grain size: 120

STBZ Cup brushes with plaited wire, with removable support ring

Massive very robust laser holder made of aluminum for industrial applicationsindustrial quality. Mounting is adjustable in all degrees of freedom. Base plate with 2 different mounting options: 1. hole for fastening to e.g. walls / ceilings 2. existing M5

RS480 High-performance roughing disc with ceramic abrasive grain. Thanks to its high binding hardness, the RS480 grinds with maximum machining, excellent material removal and boasts a long service life. This combination drastically reduces working hours w

WSW SAC M1 solder wire, Ø 0.8 mm, 500 g Alloy: Sn3.0Ag0.5Cu Temperature range: 217 - 221°C Flux: J-STD 004 - M1

16-mm HSS bi-metal hole saw With variable tooth pitch. Cutting depth: 32 mm

This high-quality series of lockable aluminium cases protects your electronic measuring instruments against damage when travelling or during field work. The double groove in the closing edge length prevents the ingress of dust and water spray. The padded

• high contrast • improved viewing angle • Interface parallel • Controller ST7066U-0A • Technology STN

This high-quality series of lockable aluminium cases protects your electronic measuring instruments against damage when travelling or during field work. The double groove in the closing edge length prevents the ingress of dust and water spray. The padded

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD