Miscellaneous - AutoCell Electronics, Gedore, PowerPlus, Romagna Plastic, Sensor (148)

Get to know the versatile Aqiila electric air pump, your ideal companion for any situation! This all-in-one portable air compressor, power bank and torch delivers impressive 10.3-bar pressure (150 psi) and air flow of 20 - 22 L/M. With a built-in 4000-mAh

Working ends polished With wooden handle Flanged blade Flanged blade

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle Cutting wheel with high service life No. 2180 3 and 2180 4 body in pressure-cast magnesium, no. 2180 5 body in pressure-cast aluminium No. 2180 5 with qu

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Solvent-free two-component adhesive on epoxy resin basis for particularly fast adhesion on small surfaces. The processing time is up to 2 minutes, and hand-tightness is achieved after 5 minutes. The final strength is approx. 800 N/cm². The bonded joint ha

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

Solvent-free two-component adhesive on epoxy resin basis for highest loads. The processing time is up to 90 minutes. Curing time and final strength are temperature-dependent. At room temperature, solid after 12 hours. The bonded joint is impact-resistant,

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Nearly unbreakable fibreglass handle

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Power Sensor Support for FPH handheld spectrum analyzer (unregistred software license).

Acc. to DIN 5128-90, 90 Shore A With 2 flat surfaces With ash handle

GEDORE vanadium steel 61CrSiV5, sizes 0.7 mm and 0.9 mm gun-metal finish, zinc-plated up to size 12 mm, chrome-plated up from size 14 mm Vanadium steel 61CrSiV5, galvanised

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished Delivery in GEDORE i-BOXX® 72 no. 1101 L Dimensions: W 367 x D 316 x H 72 mm Dimensions: W 367 x D 316 x H 72 mm

Mounting shank For 68/68S/68W/80/80S/80W drill bits M16 external thread with holes for centre drill. Driven by SDS Plus shank Drill Ø 9 mm (Does not include drill bit)

In acc. with DIN 6450 In metal case with lid Hot forged Hardened and carefully tempered Safety impact head, blue painted

Flexibility, visibility and quick access to tools, accessories and other parts with the Superclip system. It consists of a tool wall panel (steel perforated plate) and different versions of tool hooks. The clips can be mounted anywhere on the wall and mov

With strong, non-slip fabric strap Plastic-covered handle Chrome-vanadium steel 31CrV3, chrome-plated

Chrome-vanadium steel Chrome-plated Jaw set at 15° Ratchet mechanism with 72 teeth Smallest return angle Matt satin chrome-plated finish Chrome-vanadium steel In holder

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

In handy sheet metal case In robust sheet metal case

Stable lock with adjustable strap With flexible straps inside For tools up to 240 mm in length With 8 resp. 12 compartments standard and 1 compartment for small parts Without spanners Without tools

Ring 15° offset from shaft Hexagon gap 30° offset, UD-section at 15° offset Sizes 8x10 to 12x14 mm with hexagon For applications involving hydraulic/brake lines GEDORE vanadium steel 31CrV3, chrome-plated * not standardised Hexagonal opening 30° offset, U

With 2 hexagons, same size each end Long blade with ball end 2C-T-handle with hanging hole GEDORE vanadium steel 61CrSiV5, chromated Vanadium steel 61CrSiV5, chromated

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle No. 2270 5 with adjustable third pressure roller for optimally guiding different pipe dimensions With quick-release Body in pressure-cast aluminium Ename

Acc. to DIN 5128-90, 90 Shore A With 2 flat surfaces With ash handle

Hammer head forged, black varnished, striking face and pein polished Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Flexible thin shaft for smallest gaps

Slim pattern, oval shaft GEDORE vanadium steel 31CrV3, heads finely polished, chrome-plated * not standardised Jaw: ground precisely to exact nominal size for optimum contact areas Secure grip thanks to slim profile shaft Overloading indicated by deformat

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished In plastic wallet no. 570390 In plastic rolling bag

Flexible thin shaft for smallest gaps