Miscellaneous - AutoCell Electronics, Gedore, PowerPlus, Romagna Plastic, Sensor (147)

Further panels can be added in either direction, with special spacers for wall fitting Made from solid sheet steel 1.5 mm thick, all 4 edges are bevelled Euro perforation 10 x 38 mm Dimensions: L 987 x H 493 mm GEDORE blue powder-coated Tools not supplied

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Hammer head forged, black varnished, striking face and pein polished Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Universal use for service and assembly work With all advantages of a recoilless hammer with higher impact Less energy necessary, easier working With exchangeable splinter-proof, shatter-proof and wear-resistant polyamide head (E 247), 75 Shore D, tested t

36 1-140 made from C45 steel 36 2-200 made from GEDORE vanadium steel 31CrV3 Chrome-plated

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

The small, free-turning deburring knife adjusts to the contour of the workpiece and removes burr The small deburring knife can rotate freely to adapt to the contour and remove the burr

Bristle field 110 x 40 mm Bristle field 110 x 40 mm

Nickel plated steel construction for strength & easy cleaning. Suitable for use with electric drills at speeds between 200 - 700 rpm.

With 13 mm hexagon drive and additional adaptors for 9, 10, 11 and 14 mm With pivoted hook for right or left hand operation Enamelled blue Painted blue

Also suitable for stainless steel pipes Spare chain E 4589 A Spare chain No. E-4589 A

Body in zinc-plated pressure-cast aluminium, for pipes 35 - 66mm Ø, cutting wheel made from high-alloy stainless steel, especially for cutting stainless steel pipes with high service life. Easy handling via ratchet feed with automatic infeed of the cuttin

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle Cutting wheel with high service life No. 2180 3 and 2180 4 body in pressure-cast magnesium, no. 2180 5 body in pressure-cast aluminium No. 2180 5 with qu

Pulse Measurements with Power Sensor for FPH handheld spectrum analyzer (unregistred software license).

Adapter plate which is connected on the bottom of a CarryMore unit and links together the unit with a power tool box.

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 4.5 x 60, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

Advanced Analysis option for Rohde & Schwarz Power Analyzer HMC8015 (unregistered software license).

Ergonomic, air-cushioned 2-component handle Optimum impact force - a result of its perfect balance Fatigue-free working due to the new anti-vibration system With straight-through shaft right to the end of the handle With magnetic nail holder With magnetic

Hardened in accordance with the technical specifications for striking tools to DIN 7255 Working edge polished and clear varnished In PVC holder In PVC holder

GEDORE vanadium steel 31CrV3, chrome-plated Vanadium steel 31CrV3, chrome-plated