Miscellaneous - Edding, Knipex (1,080)

Pliers and wrench in one tool, ideal for gripping, holding, pressing and bending workpieces, also for the protective mounting of surface-coated fittings, Infinitely variable gripping of all wrench sizes up to 35/42, parallel-guided smooth gripping jaws. Q

High cutting capacity with little effort due to optimum co-ordination of cutting edge angle and transmission ratio. cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC chrome vanadium heavy-duty steel, forged, multi stage

Heavy-duty and hard-wearing gripping pliers. different jaw styles chrome vanadium electric steel, forged, oil-hardened

edding 4085 chalk marker - bright colours on boards and glass The edding 4085 chalk marker is undoubtedly the perfect choice for exquisite writing and elegant drawings with chalk. Its fine bullet tip releases liquid chalk with a high degree of opacity, al

Self-adjusting crimping pliers for wire end ferrules with reduced grip width. For crimping wire end ferrules according to DIN 46228 parts 1 + 4 Self-adjustment to the required wire end size Consistently high crimping quality due to integral lock (self-re

6-piece tool set in plastic case for working on electronic devices. Contents: Gripping pliers 115 mm, side cutters 115 m, 1 x micro slot screwdriver 0.4 x 2.5/0.5 x 3.0/0.6 x 3.5/0.8 x 4.0mm, 1 x micro Philips screwdriver PH0/PH1.

edding 4085 chalk marker - bright colours on boards and glass The edding 4085 chalk marker is undoubtedly the perfect choice for exquisite writing and elegant drawings with chalk. Its fine bullet tip releases liquid chalk with a high degree of opacity, al

With crimping tool for wire end sleeves 97 53 09 and KNIPEX PreciStrip16® 12 52 195. T-Loc lock for one-hand operation: open or close the systainer® with one twist and connect it to a second systainer®. Product advantages: In TANOS MINI-systainer® (sturdy

Precision circlip pliers For external circlips from 10 to 25 mm in diameter Length 125 mm, angled. Wear protective goggles when working with retaining rings.

Polished head, handles with multi-component casings, glass-fibre-reinforced • Precision ground blades with fine serration for a clean, non-slip cut • Blade with cable cutter • With plastic belt pouch • Universal shears for electricians • Handles with mult

Optimally suited for design fittings and other highly sensitive materials thanks to soft, smooth gripping surfaces. Allows use on chrome if the jaws of the pliers wrench have been damaged by improper or too rough use.

The indispensable cutting tool for multi-faceted use. High-quality material and precision processing for high durability. Precision cutting edges additionally inductively hardened, (cutting edge hardness approx. 62 HRC) for soft and hard wire. Clean cu

Protects against contact with a stripped live conductor (max. Ø 10 mm) solid plastic

precision cutting edges for soft and hard wire as well as piano wire cuts bolts, nails, rivets, etc. up to 5.2 mm dia. most efficient joint design ensures exceptional cutting performance cutting edges additionally induction hardened, cutting edge hardn

Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. sturdy, zero backlash box joint low-friction double spring for gentle and even opening the polish together with a fine film of oil offer effective rust protection - n

Knipex compact case for electronic assembly. An essential collection of VDE tools for assembly work. 7-piece set in plastic case. Contents: 1 x combination pliers 180 mm VDE 1 x pantograph pliers 200 mm VDE 1 x alligator water pump pliers 180 mm 3 x screw

Electricians’ Gloves for added protection when working live or close to live parts classification: 0

Combination pliers, lightweight, with cutting edges for hard and soft wire, long cutting edges for thicker cable. Blades additionally inductively hardened. Length: 180 mm Head chrome-plated, handles VDE-insulated, 1000 V. Cutting force: Soft wire up to 3.

Pipe wrench by Knipex - slim, S-type jaw. jaws with offset teeth in opposite direction teeth additionally induction hardened three-point contact on pipes, self-locking I-beam handle design captive adjusting nut red powder coated, jaws bright ground

Replacement blade with guide shoe for stripping knife 16 50 145 SB

Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too. a second pair of blades holds the remaining insulation reliably in place replaceable shaped blade adapted precisely t

The waterproof and permanent ink of the edding 22 makes it ideal for writing on almost all surfaces. This edding permanent marker is also ultra eco-friendly - at least 90% of the total plastic used is made from recycled material (83% post-consumer). Eco-f

handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist) gripping surfaces with special convex contour on one side for secure gripping of flat parts milled groove in the gripping area permits small parts such as n

Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force. handle design prevents rolling chrome vanadium molybdenum steel

Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force. handle design prevents rolling chrome vanadium molybdenum steel reduced blade isolation diameter for recessed spring and screw elements

light design made of hard-wearing, reinforced polyester fabric front additionally reinforced with aluminium brackets semi-fold-out front with adjustable loops and exterior document compartment with galvanized steel base tray with carrying handle and a

Cutting face flush ground. For nearly flush cutting of moulded plastic components from sprues. cuts soft materials such as lead in a flush cut with opening spring vanadium electric steel- forged, oil-hardened

Industry painter with extremely durable and highly opaque colour paste Ideally suited for labelling rough surfaces, dirty materials and rusty metals. • Fade-resistant, smudge-resistant and waterproof once dry • Also marks on clean surfaces underwater • Ti

90 23 01 E01 Spare blade for 90 23 01

Paint marker - fine lines for large tasks Paint markers are ideal for all permanent markings on a wide range of materials such as glass, metal, plastic, paper or wood. Thanks to their excellent coverage, markings on dark and transparent surfaces are parti

OHP marker with corrosion-resistant, metal-framed bullet tip For very clear, vivid writing on an overhead projector, also for labelling glass and plastics. • Permanent, waterproof ink • Stroke width: approx. 0.3 mm • Colour: Green

Pipe wrench by Knipex - slim, S-type jaw. jaws with offset teeth in opposite direction teeth additionally induction hardened three-point contact on pipes, self-locking I-beam handle design captive adjusting nut red powder coated, jaws bright ground

35 % less effort required than with conventional combination pliers. with cutting edges (hardness approx. 63 HRC) for heavy duty easier work due to optimised leverage easier cutting, powerful gripping, bending and pulling long cutting edges for thicker

Furniture marker for permanently retouching and sealing scratches on veneers and solid wood of different types The round tip has a line width of 1.5 - 2 mm The paint-like ink is water- and smudge-proof, quick drying, odourless and resistant to mild hous

pliers black atramentized, head polished, handles with multi-component grips

Refill ink with capillary system - ideal for clean and simple refilling of almost all edding whiteboard markers The refill bottle contains 25 ml Simply place the marker in the refill bottle with the tip down for at least one hour, ideally overnight. The

The simple solution to an old problem There are many tricks for easily removing labels, avoiding sticky fingers and unsightly adhesive residue, but most of the time the exact opposite happens. The handy label removal marker edding 8180 provides you with a

Crimping pliers for wire end ferrules For crimping wire end ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm² Crimping in marked half-round dies for reliable connections between the sleeve and the conductor 9 particularly deep dies with coni

Industrial permanent marker Ideally suited for marking slightly oily and dusty surfaces. • Bullet tip • For industrial use Colour: blue Stroke width: approx. 1.5 - 3 mm Filled with smudge-resistant and waterproof ink that is also resistant to etching solu

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors With threaded holes for cutting off copper or MS threaded pins with M 2.6/M 3/M 3.5/M 4 and M 5 Screw joint for a high le