Miscellaneous - Gedore, PowerPlus (304)

With wolf's jaw

Ergonomic soft rubber hand grips Fixing of the sawblade by simple turning the blue clamping element in the hand grip Clamping piece adjustable by 40° Saw blade bimetal 407 A Captive dowel pins fix the saw blade The combination of lightweight aluminium bra

Oval head Dual-material handle, for easy handling For sockets, accessories etc. with square drive as per DIN 3120 - C 10, ISO 1174, with ball retention groove 2-component-handle for easy transfer of force 2-component-handle for a hands-friendly transfer o

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and

Gel/Compact power adhesive for difficult surfaces Extremely flexible and heat-resistant Pattex Gel/Compact power adhesive is ideal for vertical and horizontal surfaces and bonds quickly. Thanks to the flexible gel structure, this adhesive does not drip an

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

High torque transfer Adjustable from 460 to 600 mm without load reduction Telescopic shaft lockable in 5 positions 2-component handle 2-component-handle for easy transfer of force For sockets, accessories etc. with square drive as per DIN 3120 - C 12,5, I

Teeth offset against direction of rotation Roller secured against loss Mouth position 45° angled Teeth offset against direction of rotation Jaws polished Captive adjusting nut Chrome-vanadium steel

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

With retractable deburring tool Guiding rollers with groove for flared pipes Exact telescope guide Guiding rollers with groove for flared tubes With 4 supporting rollers Metal housing With large turning handle

Blade nickel-plated, fully insulated blade conforming to DIN VDE 0680-6 4615 3 with metal clip and yellow cap No. 4615 3 with metal clip and yellow cap

In accordance with DIN 3113, ISO 3318 Ring offset to 15°, reversible for right and left hand operation 72 teeth Ratchet mechanism Return angle 5° Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In rugged plastic case

An essential aid, for example when working with heat-shrink tubing or when drying paint. Technical details Can be switched between two settings: 300 l/min at 350°C and 500 l/min at 550°C Operates at 230 V/50 Hz Power: 1500 W Incl. precision nozzle

Adjustable, releasing and sturdy tubular torque wrench with integrated lever ratchet and with square drive for industry and the trades Classified according to DIN EN 6789: 2017 Type II Class A, calibrated to a maximum permissible deviation of +/- 3 % and

Practical service tool Stable, needle-like setting tip and thin cleaning rod Ideal for cleaning and adjusting windscreen washer nozzles and headlamp washer nozzles With retaining clip and protective cap Aluminum

For the fast and easy insertion and removal of studs, bolts, etc. With hexagon drive With hexagon drive

Q200 Plus chipboard screw TX, partial thread Thread: 5,0 Thread: 60 mm Steel zinced, Plastic-Box

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and

Hardened and tempered steel to EN 10083 Varnished, face and ball ground Double-curved hickory handle 360° clamping force of the tapered collar fixes the hammer head

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

For one hand operation Automatic impact release by spring mechanism Impact power infinitely adjustable between 60 - 130 N With 2C hand protection for comfortable and safe working

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

In handy sheet metal case In robust sheet metal case

The 3-phase power measurement terminal makes it possible to measure the electrical data of a three-phase supply network. The voltage is measured via the network's connection to terminal points L1, L2, L3 and N. The power of the three phases is supplied v

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 5.0 x 50, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

Whether you're planning a road trip or getting out in nature on a camping trip, the Aqiila Powerstation Powerbird S140 is the perfect partner for longer adventures. This powerful and portable power station ensures that you always have plenty of power wher

With 2 reversible bending forms 3/16'' - 1/4'' Ø (4,75 - 6 mm Ø) and 8 - 10 mm Ø For soft copper pipes EN 1057, all non-ferrous metal pipes as well as thin-walled precision steel pipes and brake lines Bright nickel-plated, handles PVC coated Bright nickel

Premium chisels with self-sharpening effect offer the longest service lifes for the maximum efficiency in terms of results - durable and powerful.

Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Use: Controlled screw tightening from 110 to 550 Nm Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features:

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

One tool that works like a spanner and pliers DIN ISO 5743 Can replace two complete open-ended spanner sets, metric and inch (0-42mm/0-1.5/8'') Careful assembly of bolt connections with delicate surfaces (e.g. chrome-plated fittings) Adjustable, universal

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 3.5 x 35, blue galvanised steel, 1x sliding, VE 1000 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION:

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive as per DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, d

Acc. to ISO 6787 Jaw set at 15° Polished head with lasered scale High torque 40-50 HRC Chrome-vanadium steel Chrome-plated

The combination soldering station for every soldering task and challenge The solution for all application requirements, whether pico-, micro- or high-performance soldering or soldering with forceps, from component size 0402 to 1612 and beyond. Can be easi