Miscellaneous Proxxon (170)

Mobile version of the proven super jigsaw STS/E (No. 28 530). Ideal for curved cuts in wood up to 12 mm, in composites up to 5 mm and in non-ferrous metal up to 3 mm. Stepless stroke rate control from 2000 to 4500 rpm. Four Supercut saw blades are include

New battery device made in Europe. Perfect for VA railing and piping construction. For perfect surfaces without time-consuming manual reworking. Ideal for work also in VA railing and piping construction. High-quality 10.8 V Li-ion battery with 2.6 Ah for

Brushless direct drive: quiet, vibration-free operation with high precision. Made in Germany. Infinitely variable speed preselection from 400 to 6000 rpm. Digital speed display. Drill head can be swivelled though 360° (indicated on a scale). With 230-V di

For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and craftsmen, and electronics engineers. • Ball bearing spindle made of ground steel. With lock b

High-quality steel brush for high removal rate. 2 pieces, cup shape

PROXXON abrasive mop roller for WAS/E and WAS/A roller grinders. For cleaning, grinding and removal of flat surfaces. Grinding compartments made of normal corundum are elastic and adapt to the contours of the workpiece being machined. For finishing work i

Diamond grinding pins ball 1.8mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter 2.35

MICRO-Spezial-Haken-Set, 4-teilig Ideal zum Trennen von Drähten, Entfernen von kleinen Sicherungen sowie zum Ein- und Ausbau von O-Ringen. Zum Einsatz im KFZ-Bereich, in Handwerk und Industrie. Die Spezial-Haken unterstützen überall dort, wo Finger nicht

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

10-piece polishing set for polishing metal, glass, precious metal, porcelain and plastic.

Tip turning device For super-precise work with high concentricity. The scope of delivery includes: 1 drive plate, 2 fixed centre points (MK 2 and MK 1/ short) and 1 drive plate (rotating heart). Packed in a wooden case.

Rotary table can be rotated through 45° to one side for mitre cuts. With integrated clamping device. Jaws with prism 27 mm wide. Clamping width max. 20 mm. Cutting depth up to 13 mm. A groove allows the H0 model tracks to be clamped. Adjustable longitudin

Concentric clamping. Made of steel. Clamping range with reversing jaws from 1.5 - 20 mm inside and from 12 - 50 mm outside. Lining with M 16 x 1 internal thread for screwing onto the main spindle of the DB 250.

PROXXON professional polishing sponges. For applying polishing emulsion to paint and metal surfaces and subsequent polishing.

Cut saw blades with cross pin. 127 mm. For thin materials, soft and hard wood and plastic. 1.86 x 0.24 mm

Workman's universal tool case. In the proven L-BOXX system. 14 socket spanner inserts 1/2'' (12.5 mm), 8 - 24 mm Standard ratchet 1/2'' Universal joint 125-mm and 250-mm extensions 4 deep-socket socket spanner inserts, 10 - 19 mm 15 SlimLine combinati

The flap disc is made from aluminum-oxide with a high stock removal rate and is ideal for grinding and smoothing...

Tool set for glass working Consisting of 1 diamond grinding bit in a ball shape 1.0 mm and 1.8mm, 1 in a silicon carbide cone shape bit 3/2 x 5mm, and one in a bullet shape 2/2.5 x 7mm

Rotating movement for rapid polishing and for cleaning, rust removal and the final finish after painting. Special balanced, powerful, quiet and long-lasting motor. Smooth-running planetary gear in die-cast aluminium housing and continuously variable speed

Using scroll saw blades, cuts aluminium, printed circuit boards, plastic and wood. With electronic speed control. The ideal tool for model making, toy making and precision mechanics. Cuts soft wood up to 40mm, hard wood up to 10mm, plastic (including prin

MICROMOT hot glue gun HKP 220 Quick and reliable gluing of metal, wood, plastic (including plexiglass), glass, ceramics, stoneware, cardboard, leather, foams and textiles. Depending on the material and the application quantity, the glue binds after 30 sec

HSS-Spiralbohrersatz mit Zentrierspitze in Aufbewahrungsbox 6-teilig. Ø 1,5 - 2 - 2,5 - 3 - 3,5 - 4 mm. Zum punktgenauen Anbohren von Holz und Kunststoff, auch von Buntmetall, Stahl- und Edelstahlblech. Titanbeschichtung mindert Reibhaftung und erhöht Sta

Precision drilling machine set for electronic hobbyists, model makers, engravers etc. Consisting of Micromot 50/E, controllable drilling and milling unit, plus 34 tools in industrial quality. ! The 2.4 mm collet is located in the unit.

Solid main housing made of ribbed die-cast aluminium (no steel tube or sheet metal design). Double ball bearing rollers made of aluminium. Stable table with face-milled work surface, groove for mitre fence (can be swivelled up to 45° for mitre cuts). Heig

Easy sharpening of drill bits from 3 to 13 mm diameter, standard angle of 118°. The sharpening operation is controlled exactly by means of the movable carriage. This moves from left to right and also rotates the drill bit on its own axis. This operation y

With 230-V direct supply (no additional control unit required). Infinitely variable speed preselection from 10,000 to 30,000 rpm and digital speed display. Sophisticated control of the brushless motor via rotor-position and speed sensors guarantees high t

For cutting wood, plastic, glass fibre reinforced plastic, paper, cardboard, Films foils and similar materials. With a cutting width of 0.5 mm. Housing made of glass-fibre-reinforced POLYAMIDE. Gearing made of hardened steel. The MIC also makes it possibl

Load-bearing design made of die-cast aluminium parts with CNC-machined fits, which are necessary for vibration-free, clean planing of soft and hard woods. The heart of the machine: Ball-bearing-mounted planing shaft with replaceable blades made of HSS. Dr

FLEX-DOT combination screwdriver for 1/4'' standard bits and 1/4'' socket spanner inserts (6.3 mm) Rounded two-component handle with flexible nubs for fatigue-free and pain-free use: Easy to hold when changing grip. High torque and contact pressure thanks

Continuous, 3-way ball bearing mounted shaft (no gear drive). Housing head made of die-cast aluminium. With 43 mm spindle neck (Euronorm). Large, convenient switch with emergency stop function. Clearly arranged table facilitates pre-selection of the appro

PROXXON professional polishing sponges. For applying polishing emulsion to paint and metal surfaces and subsequent polishing.

Brass brushes, 2 pieces in a brush shape. Suitable for machining brass, copper, semi-precious stones, plastic and wood, as well as for cleaning electronic components and circuit boards.

Replaceable reversible planer blades For DH 40 planer. Made of HSS, length: 82 mm. 1 pair

Hard fabric polishing buffer (100 x 15 mm) Impregnated and especially stiff. For pre-polishing and polishing gold, silver, platinum, copper, brass, stainless steel and plastic to a glossy finish. Use only with polishing paste or emulsion.

Practical supplement for the THERMOCUT 230/E hot wire cutter. For repeatable and precise production of geometric bodies. For safe cutting of tall workpieces. Made of aluminum (surface-finished) for ideal gliding properties. Versatile use: Freely selectabl

Boom head with dovetail guide can be swivelled up to 90° (scale ring available). Enables bevelled drilling and versatile milling operations. Geared rack feed with return spring allowing effortless and sensitive operation. Practical drilling depth scale wi

Practical height adjustment via rack and pinion with smooth-running crank. Powerful, durable direct current motor. Spindle drive via three-speed pulley with the advantage of almost six times the torque in the lower speed range. Practical drill depth displ

Standard fine cut saw blades with cross pin. 127 mm. For soft/hard wood, plastics and other soft and especially thicker workpieces. 2.61 x 0.51 mm

Chip collecting tray with splash guard Made of 1.5 mm thick sheet steel, powder-coated. Bevels at the front and rear allow easy cleaning. Steel base with screw holes for secure standing. L 550 x W 240 x H 160 mm. The lathe shown here is not included in th

PROXXON cutting and rasping disc made of tungsten carbide. Heavy-duty removal with wood and soft materials. Elbow shape for optimal carving and modelling of wood and grout. Cooling holes for low heat development.