Miscellaneous - Adata, AutoCell Electronics, MM Spray, Romagna Plastic, Sensor (873)

• high contrast • improved viewing angle • Controller ST7066U-0A-B • Interface parallel • Technology STN

Pack of five jigsaw blades for wood, HCS Bayonet (T) shank Ref. no. T234X Serrated length: 91 mm Tooth pitch: 2.5 mm Conically ground, diagonally sharpened Example application: Clean, fast cuts Hardwood, softwood, coated panels, plastics, epoxy > 30 mm

Tool compatibility: For use with the WXMPS MS smart soldering irons and the WXsmart soldering station Perfect for all Pico applications with the smallest component sizes Smart, high-performance tips for working on the smallest components under the micros

With the Sandberg sync and charging cable, you can synchronise with your computer and charge the batteries directly from there or from a charging device with a USB port.

Colour: transparent H x W x D: 47 x 79 x 109 To partition drawer 250-3, PSC 4-01, compact case and Carry-Lite 55 Made of polypropylene (PP).

Replacement tip for desoldering iron DIA60A/DIA100 / station 988D/LF-8800. • Ø 1.0 mm

Suction cup for Edsyn lifting needles except LN 250

Forstner bit Area of use: Softwood and hardwood, veneered wood and plastic-coated boards. Designed in accordance with DIN 7483G Featuring a precision-milled centering tip For accurate drilling-in. Two peripheral cutting edges and two main cutting edges Gu

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

• Dust-proof • Dielectric strength: 350 VAC

Hexagon head wood screws Steel, blue galvanised, DIN 571 Thread: 8 mm Length: 60 mm Contents: 50 pieces

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

Replacement soldering tip for WMRS soldering pencil. • Chisel tip • 1.3 x 0.4 mm

13.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

SFBW Flap wheel brush with corrugated wire

Weller WSW soldering wires improve the quality of all manual and robotic soldering work. With a guaranteed 100% continuous flux core, combined with pure primary metal melts, WSW solder wires eliminate costly reworking and enable long-lasting, high-resista

Ersadur long-life soldering tip for Multitip C-25. • Pencil tip, approx. 1.1 mm

Solder, environmentally friendly, lead-free, Sn95.5AgCu0.7,F-SW34, 1 mm, 250 gr • Solder wire, lead-free ,1 mm, 250 gr • Diameter: 1 mm • Composite: Sn/Ag/Cu • Melting point: 217°C • Weight: 250 g • Flux-powder type: F-SW34

Steel wire cup brushes • With 6-mm mounting shank • Suitable for any power drill

Socket with oval insulated head, diameter 4 mm, made of tin-plated brass with soldered connection. • Colour: blue • Measurement category according to IEC 61010: CAT I • Standard: IEC 61010 • Contact type: unsprung socket • Connection type: M6 thread/solde

USB 3.2 Gen 1 USB-A connector USB micro B connector 5 Gbps Nickel-plated 1.00 m Round PVC Blue Label

16-mm HSS bi-metal hole saw With variable tooth pitch. Cutting depth: 32 mm

Convert a USB A cable into a USB-C cable with this USB-C 3.0 adapter. 1x USB-C™ 3.0 Adapter

ERSADUR soldering tip for i-CON TRACE soldering station

LT B soldering tip Soldering tip, chisel-shaped, loose Width A: 2.4 mm Thickness B: 0.8 mm Max. length L: 13.5 mm Corresponding soldering family FE MPR WP WSP Replacement soldering tip for WSP 80 (WSD 81).

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 3.2 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 2 pieces

Colour: transparent H x W x D: 47 x 79 x 218 To partition drawer 250-3, PSC 4-01, compact case and Carry-Lite 55 Made of polypropylene (PP).

16-mm HSS bi-metal hole saw for e.g.: Distributors With variable tooth pitch. Cutting depth: 45 mm Overall height: 40 mm

XTK10 Extremely powerful and thin cutting disc to meet the most discerning of user requirements

9430 Pouch Kraftform Kompakt 20 Plus, empty, 155 x 65 mm

Soldered, dry cut, for cutting stainless steel, iron and copper, hole 22.2 mm Colour: blue Disc: Ø 125 Thickness: x 1.4 mm

Chrome -alloy tool steel saw blade for 1981 Number of teeth/inch: 32 (1 inch/inch = 25,4 mm) Made In Germany Dimensions/Length: 150 mm Net weight (kg): 0 kg

ERSADUR soldering tips • Chisel-shaped • 5.0 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

Tool compatibility: For use with the WXMPS MS smart soldering irons and the WXsmart soldering station Perfect for all Pico applications with the smallest component sizes Smart, high-performance tips for working on the smallest components under the micros

9449 textile box Kraftform series 3100 VDE, empty, 265 x 155 x 38 mm

Reisser R2 — flat countersunk head, PZD Phillips, Pozidriv Hardened steel, blue zinc plated, sliding surface, RN 9221 TG, partial thread Thread: 6.0 mm Length: 120 mm Content: 100

4.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

6-mm carbon trimmer potentiometer with plastic housing and degree of protection IP 5 (dust-proof). The substrate in our SMD potentiometer is highly temperature-resistant and suitable for reflow soldering. Feature: • Self-extinguishing plastic parts in acc

Line laser, red, 90°, 650 nm, 16 mW, 3 V DC, 16x90 mm, class 2, with Mount16, 30x65 mm and power supply. This type is a positioning laser with power supply to project a laser line. The opening angle generates a laser line of 2m length at a distance of 1m.