Miscellaneous - Adata, AutoCell Electronics, MM Spray, Romagna Plastic, Sensor (872)

Solid wood decking screw H361 flat countersunk head, TX, milled ridges underneath head, collar, double thread Thread-Ø: 3,5 Length: 65 mm Contents: 120 pieces zinc plated yellow

JAMARA's dispensing needles are indispensable aids for precise work with superglue. The needles fit the most common superglue bottles and allow precise dosing and work even in hard to reach places. The attached dispensing needles provide excellent protect

LT 1 soldering tip Soldering tip, round shape, loose Width A: 0.25 mm Length L: 14 mm Corresponding soldering family FE MPR WP WSP Replacement soldering tip for WSP 80 (WSD 81).

Lamellar flap grinding disc by RHODIUS. Through the opening in this lamellar flap grinding disc you can always see what and where you are cutting – while keeping grinding amazingly cool and maintaining an even surface pattern. Suitable for processing thin

Solid carbide end mills With two spiral grooves and fishtail polished section (cut to the centre). Enables lowering into undrilled workpieces. For cast iron, malleable cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. Shaft

ERSADUR soldering tip for i-CON TRACE soldering station

ALPS compact, logarithmic, high-end rotary potentiometer in PCB assembly with convenient rotary property Horizontal installation Resistance: 100 kOhm Housing: dustproof seal Metal shaft (Ø x L): 6 x 20 mm with adjustment slot Incl. M8 x 0.75 nut and washe

ALPS compact, linear, high-end rotary potentiometer in PCB assembly with convenient rotary property Horizontal installation Resistance: 500 kOhm Housing: dustproof seal Metal shaft (Ø x L): 6 x 20 mm with adjustment slot Incl. M8 x 0.75 nut and washer Imp

Pan head, Phillips, PZD Pozidriv Blue galvanised steel, DIN 7981 - Z Thread: 4.2 mm (external) Length: 50 mm Content: 100

Earthing measurement cable, 4 mm connection, yellow, 50 m length, with cable reel

Analogue moving coil meter for DC with spring-loaded pointer bearing. • Accuracy class 1.5 • 90° scale • IP52 protection for enclosure front

9405 Textile Box 8767 C TORX® HF 2, leer, 152 x 159 x 45 mm

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 8.00 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

16-mm HSS bi-metal hole saw: With variable tooth pitch. Cutting depth: 32 mm

Diamond-coated glass drill bits in spherical shape For drilling and machining glass and rock types up to granite. We recommending using on bench drilling machines with a speed of 2000/rpm with the addition of coolant. Shank diameter: 2.35.

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

This high-quality and flexible 2-in-1 USB charging and data cable from Python® Series supports up to 60W of charging power, making it ideal for quickly and safely charging your notebook, ultrabook, tablet or smartphone. Its two different combination optio

ERSADUR-LF soldering tip for the i-TOOL. • Pencil tip • 0.7 mm

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 13 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

Mounting tool for HSS bi-metal hole saw with guide drill. For Ø 32-152 mm.

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

Versatile, serrated, coated on both sides Cutting width 0.23 mm For glass, metal and epoxy High-quality German product

STBZ Cup brushes with plaited wire, with removable support ring

Ceramic Master 3900 drill bit Drill bits for ceramics, tiling, hard-burned tiling, glass, acrylic glass and mirror glass. Precise drilling-in plus quick and and material-protecting propulsion. -Regular regrinding is required when working on hard materials

Moving coil measuring instrument, class 2.5 With mirror scale and zero-point correction, vertical installation

ERSADUR soldering tips • Pencil tip • 0.4 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-Pro

ERSADUR soldering tip for i-CON TRACE soldering station

Analogue ammeter for AC voltage with sprung point mounting. • Accuracy class 1.5 • 90° scale • IP52 protection for front of enclosure

ERSADUR soldering tip for i-CON TRACE soldering station

2.50-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 pieces

9439 Kraftform Kompact Stubby 19 textile box, empty, 90 x 104 mm

ERSADUR soldering tip for i-CON TRACE soldering station

4-in-1 charging at 200 W The Verbatim 200 W GaN charger combines two USB-C PD 100 W connections, a USB-C PD 65 W connection and a USB-A QC 3.0 connection in a slim, palm-sized design. This charger is ideal for powering your laptops, tablets, smartphones,

ESD discharge cable with integrated resistor. Spiral cable, 2x press-stud 10 mm/10 mm Length: 2.4 m

Pack of five jigsaw blades for wood Bayonet (T) shank Ref. no. T144D Serrated length: 75 mm Tooth pitch: 4.0 mm Example application: cross cuts

ALPS compact, logarithmic, 9.8-mm rotary potentiometer in PCB assembly/snap-in design Horizontal installation Resistance: 10 kOhm Housing: dustproof seal Plastic shaft (Ø x L): 6 x 25 mm (marked button shaft, ribbed at end) Nominal voltage: 50 VAC / 20 VD

Lamellar flap grinding disc by RHODIUS. Through the opening in this lamellar flap grinding disc you can always see what and where you are cutting – while keeping grinding amazingly cool and maintaining an even surface pattern. Suitable for processing thin

for EASY ARM 1 & EASY ARM 2 For direct mounting on the device.

5.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch