Miscellaneous - Adata, AutoCell Electronics, MM Spray, Romagna Plastic, Sensor (871)

LSZ F2 BOX Affordable lamellar grinding disc with excellent cutting performance and good tool life. 5 x LSZ F2 in an attractive, re-sealable metal tin.

11.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

Heat shrinkable tubing 3: 1 - on small roll HIS-3 - thin wall HIS-3 for electrical insulation and colored marking. Provides high protection against mechanical abrasion. • with only 5 tubing sizes the whole application range from 1 - 20 mm diameter is cove

Copper desoldering braid for optimum extraction of solder. • Width: approx. 2.0 mm • Length: approx. 30 m

ERSADUR soldering tips • Pencil point • 1.0 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-P

Enamelled copper wire on mini coil for manufacture of transformer output development and for general laboratory use. Solderable. Diameter: 0.10 mm Length: 1144 m Weight: 100 g I (A): 0.03 Insulating varnish: min. 155°C, mod. Polyurethan Long-term heat res

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

16-mm HSS bi-metal hole saw for e.g.: ISO 40 With variable tooth pitch. Cutting depth: 45 mm Overall height: 40 mm

CV wood drill bit, 4.00 mm Area of use: Softwood, hardwood, plywood, chipboard. Working length: 30 mm - 105 mm Total length: 60 mm - 160 mm

ALPS compact, linear, high-end rotary potentiometer in PCB assembly with convenient rotary property Horizontal installation Resistance: 100 kOhm Housing: dustproof seal Metal shaft (Ø x L): 6 x 20 mm with adjustment slot Incl. M8 x 0.75 nut and washer Imp

XT8 EXACT MINI The unbeatable professional tool for challenging tasks in thin sheet machining. The minimal burrs and the clean cuts mean that you can forget all about time-consuming follow-up work. The XT8 EXACT impresses with its outstandingly quiet oper

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

Tip for Weller soldering iron TCP-S/soldering station WTCP • 370°C • Round • 0.8 mm

ERSADUR soldering tip for i-CON TRACE soldering station

SDS-max chisel Forged from one piece: stable and resharpenable, long service life. With SDS-max shank. Width: pointed Total length: 400 mm

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

9413 Textile Box Kraftform Compact VDE 17 extra slim 1, empty, 240 x 148 x 47 mm

ERSADUR-LF soldering tip for the i-TOOL. • Chisel-shaped • 1.6 mm

SDS-plus chisel Forged from one piece: Stable and resharpenable, long service life. With SDS-plus shank. Working length: pointed 14 mm Total length: 250 mm

9.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

ERSADUR soldering tip for i-CON TRACE soldering station

1.2-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

ALPS compact, logarithmic, 9.8-mm rotary potentiometer in PCB assembly/snap-in design Horizontal installation Resistance: 10 kOhm Housing: dustproof seal Metal shaft (Ø x L): 6 x 12.5 mm (flattened) Incl. M9 x 0.75 nut and washer Nominal voltage: 50 VAC R

Chisel shape 480°C, 4.6 mm for TCPS, TCP 12, TCP 24, TCP 42 and FE 50M soldering iron width A: 4.6 mm , width B: 0.8 mm the Magnastat system works by means of a permanent magnet and a ferro-magnetic temperature sensor. If the soldering tip is cold, the pe

Lamellar flap grinding disc by RHODIUS. Through the opening in this lamellar flap grinding disc you can always see what and where you are cutting – while keeping grinding amazingly cool and maintaining an even surface pattern. Suitable for processing thin

Fibreglass fabrics are becoming increasingly popular due to their enormous versatility and countless possible applications. The advantages are high strength and resistance to chemicals and other environmental influences at a realistically low price. Due t

Replacement soldering tip • 0.4 mm • Pencil tip For example, for soldering iron 107 ESD / station 988D, station AT80D, station LF-1600, RND 560-00155, etc. with inner-heated tip. Tip Ø with heat element on outside 6.55 mm Tip Ø with heat element on inside

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 3.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 2 pieces

LT GW soldering tip Soldering tip, cavetto, loose Width A: 2.3 mm Thickness B: 3.2 mm Length L: 18.8 mm Corresponding soldering family FE MPR WP WSP Replacement soldering tip for WSP 80 (WSD 81).

Reisser R2 — flat countersunk head, PZD Phillips, Pozidriv Hardened steel, blue zinc plated, sliding surface, RN 9200 VG, full thread Thread: 3.5 mm Length: 35 mm Content: 200

Miniature coupler, 2 mm diameter , insulated, contact spring made of copper beryllium, nickel-plated with soldered connection. Flexible, non-crush insulating sleeve. For assembling connection cables with max. 2 mm outside diameter. • Socket Ø 2 mm, spring

9414 textile box Kraftform Kompakt W 100, empty, 140 x 88 x 47 mm

HSS super steel drill bit set 19-piece in plastic case. In gradations of 0.5 mm. Drill bit set in specially hardened HSS quality with a particularly well-reinforced core.

Dosing needle for Luer-Lock (TM) - holder.

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 11.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 9.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

Tool compatibility: For use with the WXMPS MS smart soldering irons and the WXsmart soldering station Perfect for all Pico applications with the smallest component sizes Smart, high-performance tips for working on the smallest components under the micros

• high contrast • improved viewing angle • Controller ST7066U-0A-B • Interface parallel • Technology STN

Pack of five jigsaw blades for wood, HCS Bayonet (T) shank Ref. no. T234X Serrated length: 91 mm Tooth pitch: 2.5 mm Conically ground, diagonally sharpened Example application: Clean, fast cuts Hardwood, softwood, coated panels, plastics, epoxy > 30 mm